Billet VQ37HR block.

phunk · 12-10-2019, 01:02 PM

$9 grand isnt bad. When comparing to their DE block pricing, I am assuming that we are talking about reusing the stock bed plate / main caps? In which case the final product of this block is actually a little more simple than a DE. That is just how I figure the numbers are working out. If it comes with a billet bed plate as well, that is a heavy group discount.

Spooler · 12-10-2019, 01:20 PM

Quote:

Originally Posted by phunk

$9 grand isnt bad. When comparing to their DE block pricing, I am assuming that we are talking about reusing the stock bed plate / main caps? In which case the final product of this block is actually a little more simple than a DE. That is just how I figure the numbers are working out. If it comes with a billet bed plate as well, that is a heavy group discount.

He did mention something about upgraded main caps with it. If we get more people we can get more details.

Chrisc3 · 12-11-2019, 01:44 AM

Can the 6mt hold 1500hp?

Elmo370z · 12-11-2019, 08:00 AM

Quote:

Originally Posted by Chrisc3

Can the 6mt hold 1500hp?

Yeah how much do you have to spend

Mr.Squeeze · 12-11-2019, 08:48 AM

Quote:

Originally Posted by Chrisc3

Can the 6mt hold 1500hp?

The weak link in our transmission's is the input shaft. It would be nice if there was an option to upgrade it.

Elmo370z · 12-11-2019, 09:18 AM

Quote:

Originally Posted by Mr.Squeeze

The weak link in our transmission's is the input shaft. It would be nice if there was an option to upgrade it.

There is. Break out the bank account, billet parts. Or move to a stand-alone to help manage the torque and boost off the line. Y’all spend so much time and effort into making huge power but miss the elephant in the room.

Spooler · 12-11-2019, 09:41 AM

Quote:

Originally Posted by Chrisc3

Can the 6mt hold 1500hp?

Straight answer, Noop.

Spooler · 12-11-2019, 10:30 AM

Quote:

Originally Posted by Elmo370z

There is. Break out the bank account, billet parts. Or move to a stand-alone to help manage the torque and boost off the line. Y’all spend so much time and effort into making huge power but miss the elephant in the room.

Our input shafts will break at 650hp. If you shock load the input shaft it will snap like a twig. One day mine will break.

Elmo370z · 12-11-2019, 10:48 AM

This is alien territory. Going to have to start having 1 off parts being made. Test, break, replace, test, #]^*} shyte, replace until it start to work

Elmo370z · 12-11-2019, 10:51 AM

Quote:

Originally Posted by Spooler

Our input shafts will break at 650hp. If you shock load the input shaft it will snap like a twig. One day mine will break.

With a stand-alone you can leave the line with as little or as much boost as you want. Technically you could launch a 1,000whp Z on stock axles with breaking much. For example leave the line at 6k making only 2-5 psi, the. Aggressively ramp in the boost. All depends if your tuner is willing to work with you while test and R&D. Communication is going to be huge for you if you go this route.

Rusty · 12-11-2019, 10:53 AM

All it takes is cubic dollars.

Spooler · 12-11-2019, 10:56 AM

Quote:

Originally Posted by Rusty

All it takes is cubic dollars.

Yeap, I have enough knowledge know how to build such a beast. 1500hp The problem is money. I would need 125k just for the build. The next question, will it live long. LOL 1000hp cars aren't making it off the dyno good at the moment without the Headgaskets popping.

Spooler · 12-11-2019, 10:59 AM

Quote:

Originally Posted by Elmo370z

With a stand-alone you can leave the line with as little or as much boost as you want. Technically you could launch a 1,000whp Z on stock axles with breaking much. For example leave the line at 6k making only 2-5 psi, the. Aggressively ramp in the boost. All depends if your tuner is willing to work with you while test and R&D. Communication is going to be huge for you if you go this route.

LOL, I guess you didn't understand what I was saying. If you have a high HP Z and are at a sticky drag strip. You will break the input shaft when you shift to the next gear. Already happened.

Rusty · 12-11-2019, 11:05 AM

Marky broke his in 5th when the rear tires bounced over a bump.

Mr.Squeeze · 12-11-2019, 11:27 AM

Quote:

Originally Posted by Spooler

Our input shafts will break at 650hp. If you shock load the input shaft it will snap like a twig. One day mine will break.

It can take a decent pounding when I broke mine it was after countless powershifting/flatfoot shifting. I use to beat the hell out of it sounded like a sledgehammer almost 20k miles. You have more power than what I had back in the day time will tell how long it will last.

12-10-2019, 01:02 PM	#46 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,655 Drives: 370 Rep Power: 944523	$9 grand isnt bad. When comparing to their DE block pricing, I am assuming that we are talking about reusing the stock bed plate / main caps? In which case the final product of this block is actually a little more simple than a DE. That is just how I figure the numbers are working out. If it comes with a billet bed plate as well, that is a heavy group discount. Rusty, Hotrodz and Spooler like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

12-11-2019, 10:48 AM	#54 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	This is alien territory. Going to have to start having 1 off parts being made. Test, break, replace, test, #]^*} shyte, replace until it start to work jchammond likes this.

12-11-2019, 10:53 AM	#56 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,864 Drives: 2011 Nismo GM 6M Rep Power: 2684436	All it takes is cubic dollars. Elmo370z, Ghostvette, Spooler and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-11-2019, 11:05 AM	#59 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,864 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Marky broke his in 5th when the rear tires bounced over a bump. Spooler and jchammond like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Billet Engine Block	phunk	Forced Induction	55	10-19-2021 07:54 PM
Billet block VQ	Elmo370z	Engine & Drivetrain	0	06-10-2017 10:19 PM
Bare Block, Short Block, and Engine Assy-Great Prices!!!	FBNISSAN	Drivetrain/Engine	31	12-01-2015 12:17 PM
VHR Billet Block	Mitco39	Engine & Drivetrain	17	05-06-2015 01:17 PM
VQ37HR block limitations?	Orphan	Forced Induction	59	02-25-2010 09:37 AM

12-11-2019, 01:44 AM	#48 (permalink)
Chrisc3 Base Member Join Date: Nov 2014 Location: texas Posts: 123 Drives: 2009 370z white Rep Power: 10	Can the 6mt hold 1500hp?