Announcing TopgunZ ACE Supercharger Kit!

TopgunZ · 05-09-2020, 08:25 AM

Another TopGun A2A conversion wrapped up!

redondoaveb · 05-09-2020, 09:15 AM

Quote:

Originally Posted by TopgunZ

Another TopGun A2A conversion wrapped up!

Is this one going to be on e85? What pre-filter are you using on the turbo guard?

DrBacon · 05-11-2020, 06:20 AM

Is the intake available for purchase separately yet? Going back to the states at the end of the month and would like to make a few changes to the car while stuck in the two week forced self-quarantine.

TopgunZ · 05-11-2020, 07:14 AM

Quote:

Originally Posted by redondoaveb

Is this one going to be on e85? What pre-filter are you using on the turbo guard?

Yes, this is going to be on E85. He wont hit the dyno until June though.

However, E85 numbers should be coming today from a different build, I hope.

Quote:

Originally Posted by DrBacon

Is the intake available for purchase separately yet? Going back to the states at the end of the month and would like to make a few changes to the car while stuck in the two week forced self-quarantine.

Right now there are 3 intake options.

Old K&N, Gen 1 style = 11psi SC must be removed for cleaning
Velocity Intake w/prefilter = 14psi Can be removed for cleaning without removing SC (5 minute job)
Turbo Guard = 16psi

RumbleFish · 05-11-2020, 12:52 PM

I haven't been around in a while but, WOW! TopGunz, you are the man.

One of these days, I'm getting this kit.

V8Killer · 05-11-2020, 01:42 PM

Looking like we have a good chance of getting those numbers tomorrow.

93, VP110, and E85 along with and with out the filter numbers

Quote:

Originally Posted by TopgunZ

Yes, this is going to be on E85. He wont hit the dyno until June though.

However, E85 numbers should be coming today from a different build, I hope.

Right now there are 3 intake options.

Old K&N, Gen 1 style = 11psi SC must be removed for cleaning
Velocity Intake w/prefilter = 14psi Can be removed for cleaning without removing SC (5 minute job)
Turbo Guard = 16psi

V8Killer · 05-11-2020, 07:54 PM

Scratch that spoke too soon, found out we were missing a wire harness for the fuel system. Charles has been notified and looks like Wednesday is the new day for tune. Sorry fellas

Quote:

Originally Posted by V8Killer

Looking like we have a good chance of getting those numbers tomorrow.

93, VP110, and E85 along with and with out the filter numbers

DUSHER · 05-11-2020, 10:27 PM

Quote:

Originally Posted by TopgunZ

Yes, this is going to be on E85. He wont hit the dyno until June though.

However, E85 numbers should be coming today from a different build, I hope.

Right now there are 3 intake options.

Old K&N, Gen 1 style = 11psi SC must be removed for cleaning
Velocity Intake w/prefilter = 14psi Can be removed for cleaning without removing SC (5 minute job)
Turbo Guard = 16psi

you would have some numbers with E85 if I could get my last parts

chuckie311 · 05-14-2020, 11:02 AM

let me know when you have some kits for the G37 sedan ready... also can you do the pipes with ceramic coating?

TopgunZ · 05-14-2020, 11:31 AM

Quote:

Originally Posted by chuckie311

let me know when you have some kits for the G37 sedan ready... also can you do the pipes with ceramic coating?

I sure will!

Right now I have done some in Anodized and Powder Coat. Taking a set to the coater today for White for a customer, which I am going to try to laser etch on to leave a logo.

I have not looked into ceramic coating.

chuckie311 · 05-14-2020, 12:45 PM

sounds good.. if not i can get them ceramic coated here just thought it might be another option if you had it available..

Quote:

Originally Posted by TopgunZ

I sure will!

Right now I have done some in Anodized and Powder Coat. Taking a set to the coater today for White for a customer, which I am going to try to laser etch on to leave a logo.

I have not looked into ceramic coating.

TopgunZ · 05-15-2020, 12:01 PM

What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

G37xMN · 05-15-2020, 12:26 PM

Quote:

Originally Posted by TopgunZ

What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

I’m torn between the gloss red and low texture red. I want it to match my red Power Stop brake calipers.

V8Killer · 05-15-2020, 01:58 PM

Quote:

Originally Posted by TopgunZ

What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

High Texture Black and Low Texture Red

redondoaveb · 05-15-2020, 09:26 PM

Quote:

Originally Posted by TopgunZ

What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

Candy red would be nice too

05-09-2020, 08:25 AM	#1 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Another TopGun A2A conversion wrapped up! __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-11-2020, 12:52 PM	#5 (permalink)
RumbleFish A True Z Fanatic Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,213 Drives: '10-Sport-M6 Rep Power: 8241	I haven't been around in a while but, WOW! TopGunz, you are the man. One of these days, I'm getting this kit. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

05-14-2020, 11:02 AM	#9 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 14	let me know when you have some kits for the G37 sedan ready... also can you do the pipes with ceramic coating? __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

05-15-2020, 12:01 PM	#12 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	What are your guys opinions on colors for piping? Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red? Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 05:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 06:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 09:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 12:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 12:37 PM

05-11-2020, 06:20 AM	#3 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 286 Drives: 2014 Nismo Rep Power: 27366	Is the intake available for purchase separately yet? Going back to the states at the end of the month and would like to make a few changes to the car while stuck in the two week forced self-quarantine.