Project Nismo Turbo build

Gray Goose · 01-15-2020, 09:08 AM

Quote:

Originally Posted by Spooler

The billet block would be nice. Since my motor popped, I am out on that for a while. You could build this motor out with ARP 625 and a quality headgasket, keep the boost at 17psi if you stay 11:1, Carrillo rods, and CP pistons. You may be OK for a while, You may not. I would suggest a better tuner with more experience though. Seb does remote tuning. I highly recommend you go that route. I think that was the main reason your other engine popped.

L19 or 625? I thought the L19 had more clamping force?

Spooler · 01-15-2020, 09:16 AM

Quote:

Originally Posted by Gray Goose

L19 or 625? I thought the L19 had more clamping force?

ARP 625, they are better and are less prone to corrosion issues.

Gray Goose · 03-02-2020, 08:50 AM

Whoop Whoop, getting started on the engine build today!!

I will update as I go!!

Elmo370z · 03-13-2020, 05:39 PM

Quote:

Originally Posted by Gray Goose

Whoop Whoop, getting started on the engine build today!!

I will update as I go!!

Bye any chance you ever go through your logs, and check timing and knock sensitivity. Your tuner is being put on blast right now.

redondoaveb · 03-13-2020, 05:45 PM

Quote:

Originally Posted by Elmo370z

Bye any chance you ever go through your logs, and check timing and knock sensitivity. Your tuner is being put on blast right now.

He's being raked through the coals

JLarson · 03-13-2020, 05:47 PM

Quote:

Originally Posted by redondoaveb

He's being raked through the coals

Oh yeah? Where's this going on? I've got popcorn!

JLarson · 03-13-2020, 05:49 PM

Found it! https://www.facebook.com/groups/vq35hr.37vhr/

redondoaveb · 03-13-2020, 05:59 PM

Quote:

Originally Posted by JLarson

Oh yeah? Where's this going on? I've got popcorn!

I hope you have a big box of popcorn

Elmo370z · 03-13-2020, 06:58 PM

Quote:

Originally Posted by redondoaveb

He's being raked through the coals

Exposed

redondoaveb · 03-13-2020, 07:04 PM

Quote:

Originally Posted by Elmo370z

Exposed

That's more appropriate.

Martijn_b · 03-02-2020, 09:40 AM

Completely agree with Phunks post. Especially since spare enginrd are so cheap in the USA and can still support a good level of power.

Goodluck with building and take your time to do it right!

Sent from my SM-G973F using Tapatalk

Gray Goose · 03-16-2020, 03:00 PM

Yup, I have seen all the FB post about knock sensitivity and timing. I don't believe that was my issue but I am going over my logs from the race tonight.

Elmo370z · 03-17-2020, 11:50 AM

Quote:

Originally Posted by Gray Goose

Yup, I have seen all the FB post about knock sensitivity and timing. I don't believe that was my issue but I am going over my logs from the race tonight.

Well let’s us know if anything Looked off

solidus · 03-16-2020, 06:50 PM

I place the blame squarely on these idiots demand for "Taliban Flame Maps".

Spooler · 03-16-2020, 07:07 PM

Quote:

Originally Posted by solidus

I place the blame squarely on these idiots demand for "Taliban Flame Maps".

But I wanna roast Marshmallows dude.

03-13-2020, 05:49 PM	#7 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,079 Drives: 14 Nissan 370z MR M6 Rep Power: 2684371	Found it! https://www.facebook.com/groups/vq35hr.37vhr/ __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

03-02-2020, 09:40 AM	#11 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3788	Completely agree with Phunks post. Especially since spare enginrd are so cheap in the USA and can still support a good level of power. Goodluck with building and take your time to do it right! Sent from my SM-G973F using Tapatalk __________________ Instagram: Boosted_Fairlady

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The build! Fast Intentions Twin Turbo 370z Nismo	1Z2NV	Forced Induction	0	10-02-2015 09:51 PM
G37S GTM Stage 2 Twin Turbo Build by Project X	Chi-City-G	Other Vehicles	27	07-02-2013 11:07 AM
2010 370Z NISMO Twin Turbo build courtesy of GTM	stormcrow	Forced Induction	273	02-16-2011 06:41 AM
my current build project.	kellyefields	New Forum Member	3	01-23-2011 08:19 PM
THE BUILD! Project 370Z	VIP-STATUS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	34	09-04-2009 01:25 AM

03-02-2020, 08:50 AM	#3 (permalink)
Gray Goose Base Member Join Date: Mar 2019 Location: LA Posts: 169 Drives: 2012 370Z Nismo #227 Rep Power: 8	Whoop Whoop, getting started on the engine build today!! I will update as I go!!

03-16-2020, 03:00 PM	#12 (permalink)
Gray Goose Base Member Join Date: Mar 2019 Location: LA Posts: 169 Drives: 2012 370Z Nismo #227 Rep Power: 8	Yup, I have seen all the FB post about knock sensitivity and timing. I don't believe that was my issue but I am going over my logs from the race tonight.

03-16-2020, 06:50 PM	#14 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10082	I place the blame squarely on these idiots demand for "Taliban Flame Maps".