G37S GTM Stage 2 Twin Turbo Build by Project X

Chi-City-G

I do not post on here often but I thought this would be worth sharing with the community. I have put quite of bit of work into the car aesthetically already and a few other supporting mods for this build but here is my baby before surgery:



It has finally come time to boost my G! I have gone back and forth over the forced induction options over the years as I made sure I was bored enough of the stock performance and finally came to the decision that twins were the right choice for me over a supercharger setup or any other, and that GTM's stage 2 would be the system of choice.

This build is currently in progress and the hope is to have this done by the this Saturday but there is more than a small chance that this may run a bit longer.

Project X was the only place I would even consider for this job. They honestly treat each build like it is thier own car and are honestly just a great group of guys to be around as I have got to know them over the years. You may know them from Jay's gorgeous white nismo 370Z putting out 600 whp recently dyno'ed...

Back to the build:
-GTM stage 2 twin turbo kit on my 6mt G
-Setrab 19 row oil cooler
-Spec twin disk Clutch/flywheel
-CSC upgrade
-CSF radiator upgrade
-Art Test Pipes
-HKS Camp 2 digital monitoring

On to the pics:













































I am also getting a few aspects of the engine bay and engine painted while out as well as a wire tuck.


to be continued...

ZMan8

Awesome. subd for updates

to a fellow Chicagoan!

__________________
2010 370Z 40 Anniv., 6 MT | Fast Intentions | Swift Springs | SPC | Z1Motorsports | JWM | Redline Oils | 35% Window Tint
2015 Mazda6 | 370ZChicago: Chicago Area Cars & Coffee

theDreamer

Great pics and looking forward to results.
After this weekend and your heart calms down report back on the final results: Forced Induction Finished Builds

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

COSMO

Did that shop not have a lift because it would have been a lot easier to drop the motor from the bottom. I did mine in my garage with jack stands and it was a real PITA.. Sharp looking G37...

SPOHN

Great start.

__________________

Kingbaby

more on the Z33 body modifications...

__________________
07 Silver Alloy Nissan 350Z Nismo #0191 "Lin'da"
2amR--------------------> VQ I.N.C. - Like us!

ZMan8

It's mostly all custom body work.

how it used to look: » Larry’s Project X 350z: Import Tuner Magazine / PhotoMotive

Read this for the build updates:
Taking the PX 350Z to the next level - ChicagoZ.com- A Forum for Everything Nissan Z, 350z, 370z, Infiniti G35, G37, GTR, and MORE!

__________________
2010 370Z 40 Anniv., 6 MT | Fast Intentions | Swift Springs | SPC | Z1Motorsports | JWM | Redline Oils | 35% Window Tint
2015 Mazda6 | 370ZChicago: Chicago Area Cars & Coffee

SS_Firehawk

I remember seeing this yesterday at the G37 forum, looking sweet

__________________

elperuano

Great lookin G! I'm running same kit on my g37.

I had to switch up my stance and raise the rears to get some kind of traction. U seem slammed there or the custom body kit gives that appearance. What r u gonna do for traction?

Mr.Squeeze

Nice looking G good luck on the build

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

SPOHN

I have to ask why do so many people that go FI and even the ones that don't get these small oil coolers? You think you would worry about how to warm the oil from being under cooled rather than having a small cooler that is not going to work?

__________________

soolman32

Looking good Jared

This has grabbed my attention... Please elaborate.

theDreamer

I think for the 'average' boosted VQ it is just street driven so the ability to warm the oil temp faster is better as with a 25 row cooler is enough to keep you below 220 daily with some occasionally heavy foot driving.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

Chi-City-G

Thanks bud, hope to see you around this season!

Thank you, I definitely will! Haha, after I calm of course!

Haha, yeah... I got that question over on the G37 forum as well... it have a couple of lifts but I did not capture the car while it was on it... the pics with the motor coming out are actually on a lift, just not all inclusive pictures I guess.

Haha, start? Thanks, like my wallet really needs to hear that at this point!!!

Damnit Larry for still getting more attention than me on my build thread (kidding, I added pics with that car in it for a reason)... yeah, that Z33 is on bad machine! They are making custom over fenders and they are going to be gorgeous and most likely for sale once they are done. It is the shop car and the owner who is doing this custom work recently broke his foot unfortunately so it as been delayed... I will keep you guys updated on it though as well!

^ This

Thanks man!

I am on a full UAS air ride system over my KW-V3 coils so I will be able to adjust the stance for function for sure... I just need to get some more meat on the bones of those wheels now!

Thanks bud!

I have no intention of tracking this car any time soon so I am hoping this oil cooler will be enough for this setup... I honestly barely even drive this car but I do understand what you mean... the problem is that there is very little room for a large oil cooler with most F/I kits so most people build to their need and I am hoping that this is the extent of my need for now. In a couple seasons when I am ready to let go of this being a show car and start running some track days, I will re-consider this setup for sure.

Thanks Tev!

^ this... thank you for helping elaborate. It is always better to be safe than sorry with F/I builds but again, application needs to be considered. I should have built out my motor and could have gone with a much larger radiator and oil cooler... I am jsut going off of what has been done already and it is my hope that I do not need this at this stage of my build.

Kingbaby

goes without saying big builds are always awesome...thanks again for the info

__________________
07 Silver Alloy Nissan 350Z Nismo #0191 "Lin'da"
2amR--------------------> VQ I.N.C. - Like us!