Fast Intentions Stage 2 TT build by MA-Motorsports.

Whjaxn17 · 11-24-2020, 01:38 PM

Quote:

Originally Posted by Spooler

It's an experience, that is for sure. Take your time and go slow. You have to learn with it is mostly likely to do. A better diff will help you tremendously. Wavetrac or OS Giken is your next mod. The factory VLSD is very unpredictable.

If we ever meet up I will take you for a ride.

Wavetrac has been in the car since just before ZDayz last year, I just have exactly 0 aero on the car

Spooler · 11-24-2020, 01:53 PM

Quote:

Originally Posted by Whjaxn17

Wavetrac has been in the car since just before ZDayz last year, I just have exactly 0 aero on the car

Good!!!!! 900whp is crazy. My tires aren't bald. LOL, They have been well used.

Spooler · 11-26-2020, 10:34 PM

New rear R888r's are ordered. I get a good quality heat cycle done on them in Arizona by Tirerack. That is why they have lasted as long as they did. It has to be 65 deg or higher before you can mount them. The sucky part, it is going to be too cold next week. They will sit in the garage until the time comes. Crapola....

Spooler · 11-27-2020, 06:56 PM

Here is the link to the heat cycling process tirerack uses.

https://www.tirerack.com/tires/tiret....jsp?techid=66

Kojack · 11-28-2020, 08:24 AM

Quote:

Originally Posted by Spooler

New rear R888r's are ordered. I get a good quality heat cycle done on them in Arizona by Tirerack. That is why they have lasted as long as they did. It has to be 65 deg or higher before you can mount them. The sucky part, it is going to be too cold next week. They will sit in the garage until the time comes. Crapola....

Have you tried NT05 or mickey et street ss?

Hotrodz · 11-28-2020, 09:48 AM

Quote:

Originally Posted by Kojack

Have you tried NT05 or mickey et street ss?

Both are good tires if you are looking to maximize straight line performance or drive city streets. If you want to drive to canyon carve or drive twisty roads R888R are one of the best without jumping to cup 2s.

Sent from my SM-G965U using Tapatalk

Spooler · 11-28-2020, 10:28 AM

Quote:

Originally Posted by Kojack

Have you tried NT05 or mickey et street ss?

I have something else I will use for events. Different rims and tires. For daily driving and having fun wherever, R888r's is what I run.

Spooler · 11-28-2020, 03:14 PM

Quote:

Originally Posted by Kojack

Have you tried NT05 or mickey et street ss?

Here, one of the best reviews I found a while ago. It is why I went with R888r's.

redondoaveb · 11-28-2020, 05:31 PM

Quote:

Originally Posted by Spooler

Here, one of the best reviews I found a while ago. It is why I went with R888r's.

I don't know about the nitto 555's but my nt05's would spin through 3rd gear hot or cold. I can barely get the r888r's to break loose in 2nd gear. The r888r's are by far a better tire than the nt05's

jchammond · 11-28-2020, 08:06 PM

Quote:

Originally Posted by redondoaveb;

I don't know about the nitto 555's but my nt05's would spin through 3rd gear hot or cold. I can barely get the r888r's to break loose in 2nd gear. The r888r's are by far a better tire than the nt05's

Which Supercharger was that with

redondoaveb · 11-28-2020, 08:39 PM

Quote:

Originally Posted by jchammond

Which Supercharger was that with

You mean, which upgrade to the first supercharger?

That's when it was only making 650whp. I blow superchargers, you turbo guy's blow motors

I should edit this. It's possible my car's down on power because the motor is hurt.

jchammond · 11-28-2020, 08:44 PM

Quote:

Originally Posted by redondoaveb

You mean, which upgrade to the first supercharger?

That's when it was only making 650whp. I blow superchargers, you turbo guy's blow motors

I should edit this. It's possible my car's down on power because the motor is hurt.

That’s not good

Rusty · 11-28-2020, 08:57 PM

Quote:

Originally Posted by redondoaveb

You mean, which upgrade to the first supercharger?

That's when it was only making 650whp. I blow superchargers, you turbo guy's blow motors

I should edit this. It's possible my car's down on power because the motor is hurt.

If you have no new vent holes in the block. Then you're still good.

redondoaveb · 11-28-2020, 09:04 PM

Quote:

Originally Posted by Rusty

If you have no new vent holes in the block. Then you're still good.

Or a hole in a piston

Leingod · 11-28-2020, 09:12 PM

Quote:

Originally Posted by redondoaveb

Or a hole in a piston

Some guys are into that kind of thing though...

11-26-2020, 10:34 PM	#3318 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,109 Drives: 2013 Nismo 370z Rep Power: 2684394	New rear R888r's are ordered. I get a good quality heat cycle done on them in Arizona by Tirerack. That is why they have lasted as long as they did. It has to be 65 deg or higher before you can mount them. The sucky part, it is going to be too cold next week. They will sit in the garage until the time comes. Crapola.... JARblue, Hotrodz, Ghostvette and 2 others like this.

11-27-2020, 06:56 PM	#3319 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,109 Drives: 2013 Nismo 370z Rep Power: 2684394	Here is the link to the heat cycling process tirerack uses. https://www.tirerack.com/tires/tiret....jsp?techid=66 Rusty, Hotrodz, Kojack and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM