Fast Intentions Stage 2 TT build by MA-Motorsports.

redondoaveb · 02-20-2020, 06:00 PM

Quote:

Originally Posted by Spooler

One thing I didn't have for my build was Catch cans. I think I have finally found what I was looking for. I like the SOHO catch can combo but I don't like not being able to see the coolant level and I would need to convert to a non-pressurized setup. I am leaning toward getting the Radium catch can setup. Looks like a quality kit.

When I ordered my pressurized catch can from SOHO there was a delay on the pressurized one's then they sent me a email saying they weren't making the pressurized set up anymore so I had to convert over to the non pressurized. I'll be pissed if I find out they're still selling the pressurized set up.

Spooler · 02-20-2020, 06:48 PM

Quote:

Originally Posted by redondoaveb

When I ordered my pressurized catch can from SOHO there was a delay on the pressurized one's then they sent me a email saying they weren't making the pressurized set up anymore so I had to convert over to the non pressurized. I'll be pissed if I find out they're still selling the pressurized set up.

They are not. They found an issue with them.

redondoaveb · 02-20-2020, 07:03 PM

Quote:

Originally Posted by Spooler

They are not. They found an issue with them.

That's what Nik told me too at the time. I do like their set up.

Spooler · 02-20-2020, 07:14 PM

Quote:

Originally Posted by redondoaveb

That's what Nik told me too at the time. I do like their set up.

Me too. If I had a non-pressurized expansion tank I would buy SOHO's setup and wouldn't think twice.
I could convert mine, I just don't want to.

Hotrodz · 02-20-2020, 10:26 PM

Quote:

Originally Posted by Spooler

One thing I didn't have for my build was Catch cans. I think I have finally found what I was looking for. I like the SOHO catch can combo but I don't like not being able to see the coolant level and I would need to convert to a non-pressurized setup. I am leaning toward getting the Radium catch can setup. Looks like a quality kit.

Radium makes quality products!

Sent from my SM-G965U using Tapatalk

blueranger · 02-21-2020, 08:43 PM

Quote:

Originally Posted by Spooler

One thing I didn't have for my build was Catch cans. I think I have finally found what I was looking for. I like the SOHO catch can combo but I don't like not being able to see the coolant level and I would need to convert to a non-pressurized setup. I am leaning toward getting the Radium catch can setup. Looks like a quality kit.

I run the Radium and they are top quality.

Spooler · 02-21-2020, 10:43 PM

Quote:

Originally Posted by blueranger

I run the Radium and they are top quality.

Cool, that is what I am getting.

Spooler · 02-21-2020, 10:19 AM

I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

Hotrodz · 02-21-2020, 11:08 AM

Quote:

Originally Posted by Spooler

I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

Hopefully they ship next week. You still got time regardless.

Sent from my SM-G965U using Tapatalk

Spooler · 02-21-2020, 11:52 AM

Quote:

Originally Posted by Hotrodz

Hopefully they ship next week. You still got time regardless.

Sent from my SM-G965U using Tapatalk

Yeap, I have my JWT C2 cams in hand. 4 to 6 weeks wait on the custom Cp pistons at 11:1.

Hotrodz · 02-21-2020, 12:31 PM

Quote:

Originally Posted by Spooler

Yeap, I have my JWT C2 cams in hand. 4 to 6 weeks wait on the custom Cp pistons at 11:1.

I thought you might go 9:1!

Sent from my SM-G965U using Tapatalk

Spooler · 02-21-2020, 01:20 PM

Quote:

Originally Posted by Hotrodz

I thought you might go 9:1!

Sent from my SM-G965U using Tapatalk

Noop, sticking to what I had. I was very happy with off boost response. If I don't have any knock issues or have to reduce the timing due to said knock, I am golden. The new motor just has to hold in the headgasket area, It should.

jchammond · 02-22-2020, 02:05 AM

Quote:

Originally Posted by Spooler

I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

EW may have a little room in his Tent, to put you up for the night

Spooler · 02-22-2020, 07:12 PM

Motor is at Mazworx.

I don't sleep in stinky fumigated tents. Don't sleep in tents since I got out of the service, matter of fact. I don't do camping. LMAO.

Spooler · 02-22-2020, 07:14 PM

Had a discussion with Mark. We are going to drop the compression down to 10:1 and let her eat. I am going to fully test it, boost pressure is going up.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM

02-21-2020, 10:19 AM	#8 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,180 Drives: 2013 Nismo 370z Rep Power: 2684395	I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

02-22-2020, 07:12 PM	#14 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,180 Drives: 2013 Nismo 370z Rep Power: 2684395	Motor is at Mazworx. I don't sleep in stinky fumigated tents. Don't sleep in tents since I got out of the service, matter of fact. I don't do camping. LMAO.

02-22-2020, 07:14 PM	#15 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,180 Drives: 2013 Nismo 370z Rep Power: 2684395	Had a discussion with Mark. We are going to drop the compression down to 10:1 and let her eat. I am going to fully test it, boost pressure is going up.