Fast Intentions Stage 2 TT build by MA-Motorsports.

Elmo370z · 11-09-2020, 02:47 PM

Quote:

Originally Posted by Martijn_b

Thats really sad to hear. Do you have some info on the build? Open / closed deck? Stock head stud size? Type of gasket?

Sent from my SM-G973F using Tapatalk

Doesn’t matter it all fails

Spooler · 11-09-2020, 02:55 PM

Quote:

Originally Posted by Martijn_b

Thats really sad to hear. Do you have some info on the build? Open / closed deck? Stock head stud size? Type of gasket?

Sent from my SM-G973F using Tapatalk

Open deck and L19 head studs. Not sure what head gasket he used. Doesn't matter anyway. It was a ticking time bomb.

Spooler · 11-09-2020, 03:33 PM

Nitish21 is still not going to listen, I just have that feeling. He will end up being one of the many that have disappeared. The last laugh is actually on him.

Spooler · 11-09-2020, 04:07 PM

I am enjoying the JarBlue approach. I am poking him in the eye and laughing at him.

Spooler · 11-09-2020, 06:07 PM

Mission Accomplished, I got kicked off his Instagram page. LMAO!!!!!!!!
I don't think he liked it when I told him he didn't know chit and he was a dumb MF'er.

Spooler · 11-10-2020, 08:16 PM

Check this out. Valve float on video.

Spooler · 11-12-2020, 11:22 AM

In case you guys don't know on a turbo car this can be a major issue. With the additional boost pressure put on the back of the intake valve it can induce valve float and a loss of HP. It can also destroy you valvetrain. I have always known what valve float is but I have never seen it first hand. The video above does just that. We don't see it that much because on most turbo engines the boost pressure is keep low. Crank it up to 30psi and it can be a major problem.

Spooler · 11-24-2020, 10:46 AM

Car is still doing great. No issues except for the lack of traction. Ordering new rear tires shortly.

Wuero370z · 11-24-2020, 11:09 AM

Quote:

Originally Posted by Spooler

Car is still doing great. No issues except for the lack of traction. Ordering new rear tires shortly.

You guys always talked about tires being a major expense but I really didn’t understand how bad it was...

Sent from my iPhone using Tapatalk

Spooler · 11-24-2020, 11:13 AM

Quote:

Originally Posted by Wuero370z

You guys always talked about tires being a major expense but I really didn’t understand how bad it was...

Sent from my iPhone using Tapatalk

Two R888r's 325/30/19's are a little over 1k shipped to my house. No install. Lasted a little over 8k. They are done. I still have some tread but they are heat cycled out. No traction.

Spooler · 11-24-2020, 11:18 AM

The other news is I am working on going to a MOTEC M150 next year. The car is just too much of a handful to not have it. Boost by gear and a real motorsports traction control is very much needed for safety. Our chassis is good for 700whp. Over that and it becomes very dangerous. Playing has to be limited.

Spooler · 11-24-2020, 11:32 AM

Going sideways in 4th at 25psi of boost is not much fun. That is the only time the car just about got away from me. The speed you ask, I have no idea, I wasn't looking at the speedo.

Spooler · 11-24-2020, 11:52 AM

Why did my little incident happen? I got pissed because it was spinning and left my foot in it. I got away with it that time.

Whjaxn17 · 11-24-2020, 01:00 PM

Quote:

Originally Posted by Spooler

The other news is I am working on going to a MOTEC M150 next year. The car is just too much of a handful to not have it. Boost by gear and a real motorsports traction control is very much needed for safety. Our chassis is good for 700whp. Over that and it becomes very dangerous. Playing has to be limited.

Jon said mine got really floaty and then snap steered on him a little bit on kill when he was out in it making sure everything was right...which is why it's still on wastegate. This car was the fastest thing I'd ever driven when I picked it up stock, so each liitle bolt on furthered that. Finally boosted and 534 is a helluva jump from 364.

~800 on bald tires has to be an experience

Spooler · 11-24-2020, 01:24 PM

Quote:

Originally Posted by Whjaxn17

Jon said mine got really floaty and then snap steered on him a little bit on kill when he was out in it making sure everything was right...which is why it's still on wastegate. This car was the fastest thing I'd ever driven when I picked it up stock, so each liitle bolt on furthered that. Finally boosted and 534 is a helluva jump from 364.

~800 on bald tires has to be an experience

It's an experience, that is for sure. Take your time and go slow. You have to learn what it is mostly likely to do. A better diff will help you tremendously. Wavetrac or OS Giken is your next mod. The factory VLSD is very unpredictable.

If we ever meet up I will take you for a ride.

11-09-2020, 03:33 PM	#3303 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	Nitish21 is still not going to listen, I just have that feeling. He will end up being one of the many that have disappeared. The last laugh is actually on him. JARblue and SeeThruHead like this.

11-09-2020, 04:07 PM	#3304 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	I am enjoying the JarBlue approach. I am poking him in the eye and laughing at him. JARblue, Hotrodz, Ghostvette and 2 others like this.

11-09-2020, 06:07 PM	#3305 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	Mission Accomplished, I got kicked off his Instagram page. LMAO!!!!!!!! I don't think he liked it when I told him he didn't know chit and he was a dumb MF'er. JARblue, Rusty, Optimiser and 5 others like this.

11-10-2020, 08:16 PM	#3306 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	Check this out. Valve float on video. Rusty, Hotrodz, Kojack and 5 others like this.

11-12-2020, 11:22 AM	#3307 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	In case you guys don't know on a turbo car this can be a major issue. With the additional boost pressure put on the back of the intake valve it can induce valve float and a loss of HP. It can also destroy you valvetrain. I have always known what valve float is but I have never seen it first hand. The video above does just that. We don't see it that much because on most turbo engines the boost pressure is keep low. Crank it up to 30psi and it can be a major problem. FL 4Motion, Hotrodz, Kojack and 1 others like this. Last edited by Spooler; 11-12-2020 at 02:05 PM.

11-24-2020, 10:46 AM	#3308 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	Car is still doing great. No issues except for the lack of traction. Ordering new rear tires shortly. Hotrodz, johnxxx, jchammond and 4 others like this.

11-24-2020, 11:18 AM	#3311 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	The other news is I am working on going to a MOTEC M150 next year. The car is just too much of a handful to not have it. Boost by gear and a real motorsports traction control is very much needed for safety. Our chassis is good for 700whp. Over that and it becomes very dangerous. Playing has to be limited. JARblue, Hotrodz, Ghostvette and 7 others like this.

11-24-2020, 11:32 AM	#3312 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	Going sideways in 4th at 25psi of boost is not much fun. That is the only time the car just about got away from me. The speed you ask, I have no idea, I wasn't looking at the speedo. JARblue, Hotrodz, Ghostvette and 5 others like this.

11-24-2020, 11:52 AM	#3313 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,503 Drives: 2013 Nismo 370z Rep Power: 2684391	Why did my little incident happen? I got pissed because it was spinning and left my foot in it. I got away with it that time. Hotrodz, Ghostvette, jchammond and 1 others like this. Last edited by Spooler; 11-24-2020 at 12:01 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM