Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 08-20-2021, 07:47 PM

Sorry if my car is a little too dirty for you. I drive my car. It is not a garage queen that I polish and look at. It is a tool for me to have fun. I grew out of the Mr. Clean status years ago.

Spooler · 08-20-2021, 11:05 PM

I think I shared this before. My issue is no where near as bad as this but the concept is the same. An acceptable pressure drop is only 1 psi.
You also have to remember I didn't start having any issues until I got to 25psi of boost. At that level the IAT's started to climb. It got way out
of whack at 30psi of boost.

Spooler · 08-25-2021, 07:41 AM

Ready to go out and get some Draggy times. Tired of doing nothing. I am ready to go do something.

Spooler · 08-25-2021, 08:44 AM

Already have my first ride along victim lined up. He can't wait to go for a ride. LOL

Spooler · 08-25-2021, 08:08 PM

Food for thought.

jchammond · 08-26-2021, 04:22 AM

Looking back over your previous 12,17,25# graph, unsure if I’ll be tuning much over 20#

That’s with built 7A/T & wanting it to live for a while + be able to learn the different power levels & focus on getting traction through the lower gears

What you’re building is a Monster

FL 4Motion · 08-26-2021, 05:22 AM

Quote:

Originally Posted by jchammond

Looking back over your previous 12,17,25# graph, unsure if I’ll be tuning much over 20#

That’s with built 7A/T & wanting it to live for a while + be able to learn the different power levels & focus on getting traction through the lower gears

What you’re building is a Monster

Just throw a th400 in there and call it good.

Spooler · 08-26-2021, 01:16 PM

Quote:

Originally Posted by FL 4Motion

Just throw a th400 in there and call it good.

Slush Box.... Uck!!!!

Spooler · 08-31-2021, 07:34 PM

I just signed up for Z Nationals. I am not doing the track day. I forgot to sign up and they are full. I promised my nephew I would come hang out so I figured we would go to Z Nationals and have a blast.

Spooler · 08-31-2021, 08:29 PM

I thought real hard about going to FL2K to do some roll racing. My input shaft would not survive on a prepped track more than likely. If I broke the car so quickly my wife would kill me. So, Z Nationals it is this time.

Spooler · 08-31-2021, 09:52 PM

Car is supposed to finish up this week and dyno time to finish the tune will be next week. We shall see if it makes it. I sure miss it. I got my fingers crossed.

Spooler · 09-07-2021, 10:51 AM

Moving on along at a steady pace. No worries from me. Ready to have some fun.

Rusty · 09-07-2021, 01:43 PM

Quote:

Originally Posted by Spooler

Moving on along at a steady pace. No worries from me. Ready to have some fun.

Next week? Next month? Next year?

Spooler · 09-07-2021, 01:46 PM

Quote:

Originally Posted by Rusty

Next week? Next month? Next year?

Next Whenever...... This week or next week. LOL

gbrettin · 09-08-2021, 09:53 AM

Yeah, deadlines are pretty darn hard to follow. I've learned that forward progress of any sort is good progress.

08-20-2021, 07:47 PM	#4261 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	Sorry if my car is a little too dirty for you. I drive my car. It is not a garage queen that I polish and look at. It is a tool for me to have fun. I grew out of the Mr. Clean status years ago. FL 4Motion, gbrettin, JARblue and 3 others like this.

08-20-2021, 11:05 PM	#4262 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	I think I shared this before. My issue is no where near as bad as this but the concept is the same. An acceptable pressure drop is only 1 psi. You also have to remember I didn't start having any issues until I got to 25psi of boost. At that level the IAT's started to climb. It got way out of whack at 30psi of boost. Last edited by Spooler; 08-20-2021 at 11:26 PM.

08-25-2021, 07:41 AM	#4263 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	Ready to go out and get some Draggy times. Tired of doing nothing. I am ready to go do something. FL 4Motion, phunk, JARblue and 4 others like this.

08-25-2021, 08:44 AM	#4264 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	Already have my first ride along victim lined up. He can't wait to go for a ride. LOL JARblue likes this. Last edited by Spooler; 08-25-2021 at 12:05 PM.

08-25-2021, 08:08 PM	#4265 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	Food for thought. jchammond likes this.

08-26-2021, 04:22 AM	#4266 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Looking back over your previous 12,17,25# graph, unsure if I’ll be tuning much over 20# That’s with built 7A/T & wanting it to live for a while + be able to learn the different power levels & focus on getting traction through the lower gears What you’re building is a Monster FL 4Motion, Rusty, Hotrodz and 4 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-31-2021, 07:34 PM	#4269 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	I just signed up for Z Nationals. I am not doing the track day. I forgot to sign up and they are full. I promised my nephew I would come hang out so I figured we would go to Z Nationals and have a blast. FL 4Motion, BOLIO 671, Mr.Squeeze and 5 others like this.

08-31-2021, 08:29 PM	#4270 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	I thought real hard about going to FL2K to do some roll racing. My input shaft would not survive on a prepped track more than likely. If I broke the car so quickly my wife would kill me. So, Z Nationals it is this time. FL 4Motion, BOLIO 671, Mr.Squeeze and 2 others like this.

08-31-2021, 09:52 PM	#4271 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	Car is supposed to finish up this week and dyno time to finish the tune will be next week. We shall see if it makes it. I sure miss it. I got my fingers crossed. BOLIO 671, Mr.Squeeze, gbrettin and 9 others like this.

09-07-2021, 10:51 AM	#4272 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,506 Drives: 2013 Nismo 370z Rep Power: 2684391	Moving on along at a steady pace. No worries from me. Ready to have some fun. gbrettin, JARblue, Rusty and 3 others like this.

09-08-2021, 09:53 AM	#4275 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Yeah, deadlines are pretty darn hard to follow. I've learned that forward progress of any sort is good progress. JARblue, Rusty, Hotrodz and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM