Topgunz - air to air upgrade

G3RSTY7 · 06-20-2018, 09:39 PM

Quote:

Originally Posted by redondoaveb

Here's how Seb did mine. Pic is drivers side. Passenger side has hose running from pcv to rear of engine compartment and filter installed on end of hose. Couldn't get pic of that.

Thanks that’s really helpful I think I get what you’re saying. So look at the pic of my breather filter and you can see that hose just next to it on the upper left with the blue octagon, he deleted that hose and just put a filter there? And my other pic there is a T joint (where that same hose splits off to the blue octagon port), instead of that T joint he just capped that part of the hose with filter also?
Thanks for the help a big reason i wanted to do this was to learn my engine bay, and imma learn today!

redondoaveb · 06-20-2018, 09:48 PM

Quote:

Originally Posted by G3RSTY7

Thanks that’s really helpful I think I get what you’re saying. So look at the pic of my breather filter and you can see that hose just next to it on the upper left with the blue octagon, he deleted that hose and just put a filter there? And my other pic there is a T joint (where that same hose splits off to the blue octagon port), instead of that T joint he just capped that part of the hose with filter also?
Thanks for the help a big reason i wanted to do this was to learn my engine bay, and imma learn today!

First pic is correct. Second pic, he deleted the tee completely and ran a hose off the pcv valve to the rear of the engine bay and installed a filter on the end of the hose.

And when I was looking at mine I noticed the passenger side has a kink in it right after it exits the pcv valve.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM