04-10-2017, 01:50 PM
|
#1 (permalink)
|
|
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20170
|
Quote:
Originally Posted by milkcow500
Damnit, I spent over half a year trying to find a pulley spacer for the 54mm pulley. I eventually had to get a machine shop to custom make one...
Not sure if someone asked this before, but any tips on cutting the extra rib off that belt or do I just take a utility knife to it?
|
Yes, you can do it with a utility knife. Just use a new blade and make each cut about six inches long and about 1/16 inch deep. It will take several cuts to get all the way through. The HD belt is tough!
I'm working on a design that will cut the rib off on my lathe so it will be really clean and straight.
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!
|
|
|
Similar Threads
1908Likes
Hybrid Mode
