Topgunz - air to air upgrade

StillenZ84

So took another step back today as my CEL started flashing again and pulled 6 deg of timing. I talked to Seb and he is going to back my timing off a little to see if that is what it could be. If not I know something is still touching somewhere. Should have another flash in the next hour to try out. Very frustrating. 1st and 2nd are good then the top of 3rd is starts flashing. Posted a video below.

https://youtu.be/eJOHT7rgcds

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34