BBR shop car build

Streetz

Just out of curiosity what exactly does removing the front sway bar do? I have heard this for years, but never full understood it much. Getting the Z chassis to hook up is a full time job. Ive been trying everything everyone talks about and nothing works. The compression camber on the suspension design is too much for high horsepower builds.

I have solid subframe and diff mounts. I only noticed a difference on handling, But over all nothing on traction.

My next try will be running 28" TALL tires.

BBRSpeedWorks

Talking it off helps with weight transfer to sit on the the tires. The solid mounts are good but u need to do all the mounts in the back I. E. All the mounts on the rear hubs all that.. what tires are you running? You do not want a z to squat. Squat equals wheel hop.. this is what I do, run the stiffs spring u can get in the back, poly everything, get it aliNed but strap it down as tight as u can get it to see what the car is going to do with the lil bit of swat it has left..make ur adjustments there so ur at 0 wit the lil bit of swat it has left..run ur tire pressure at 15 psi. Make adjustments from there. But this is what I did someone else may go a different route....
For the daily I'll be running nt05r 325
For the track Mt x275 15x1 275 tire

__________________
God'Z Gift.