Vented hood thread

DR_ · 07-17-2013, 10:54 AM

Anyone try to DIY OEM vented hood like the S2000 guys do?

DR_ · 07-17-2013, 11:06 AM

Found an old thread here

MyKindaGuise · 07-17-2013, 02:13 PM

Quote:

Originally Posted by DR_

Anyone try to DIY OEM vented hood like the S2000 guys do?

Kind of want to try this. Im scared though.

Wiggins3377 · 07-17-2013, 02:29 PM

Quote:

Originally Posted by MyKindaGuise

Kind of want to try this. Im scared though.

do it! id love to see the results.

cooltoy · 07-17-2013, 03:09 PM

Not sure how that would work on a Z. Location of the support ribs might not allow for a look like that.

DIGItonium · 07-17-2013, 03:19 PM

I received a one-off vented hood from Aero Jacket, which makes use of the OEM hood and is based off the one on Jamaica@UAMotorsports car. It's pretty rough and requires a bit of work from the body shop, but I rather have this custom vented hood than a CF vented hood or anything with protruding add on vents. I'm just crossing my fingers that it'll turn out well. I'll work underneath to improve stability and aesthetics at a later time... looks pretty gross underneath haha.

DarkJak · 07-17-2013, 03:49 PM

Yeah looks pretty rough but the vent placement is probably the best for extracting heat right after the radiator.

cooltoy · 07-17-2013, 04:18 PM

Quote:

Originally Posted by DIGItonium

I received a one-off vented hood from Aero Jacket, which makes use of the OEM hood and is based off the one on Jamaica@UAMotorsports car. It's pretty rough and requires a bit of work from the body shop, but I rather have this custom vented hood than a CF vented hood or anything with protruding add on vents. I'm just crossing my fingers that it'll turn out well. I'll work underneath to improve stability and aesthetics at a later time... looks pretty gross underneath haha.

So what did they do? Cut those in a stock hood?

DIGItonium · 07-17-2013, 04:27 PM

Yea, they cut out a section underneath to clear the path to cut the exposed section of the hood. The line in the pic was partially cut to help fold the flap, which was a bit delicate. To hold them in place, they used some fiber and epoxy. The vent gap is about 1" wide, so hopefully it's enough to vent something. I'm told their drift cars have these vents as well.

The shop handling my car specializes in auto body repair and PDR, and they're not too excited about custom work like this. The tech will use an epoxy that can adhere to aluminum (possibly same as what he's using for PDR of the body panels). He will try to fill and clean the epoxy and weave section, and also deburr some sharp and rough edges. I'm told it'll take about 8 hours of labor.

In the near future I might try to go back underneath the hood to clean up the work, add grills and some reinforcement as well. If I decide to add some silver foil tape, it'll be for the vented section since I want the hood to dissipate heat - not reflect it back.

It is a lot of work, and I hope my car doesn't have to endure a freak hail and wind storm like this again... just one more year till I get a hold of a beater car haha.

Voice59 · 07-17-2013, 05:44 PM

I got the Seibon GTR style hood. I guess it's designed so water can't really get in unless it's being forced upward onto the hood. Even driving through rain I've never had a problem with "large" amounts of water getting in there.

Unique_Z · 07-18-2013, 12:18 PM

CarbonSignal's vented hood

wstar · 07-19-2013, 12:36 PM

Has anyone (DIY or commercial) actually analyzed the pressure and airflow situation to figure out the best location and flow direction for vents? There should be good pressure under there from the radiator outflow, it's just a question of where the best place to exhaust it is. Are the GTR-style NACA ducts intended to draw air out and forward via the airflow that likely reverses at the base of the windshield? The CarbonSignal vents (rearward flowing up the sides) could work, too, but it would just be nice to see some real pressure/flow proof.

theDreamer · 07-19-2013, 12:38 PM

Quote:

Originally Posted by wstar

Has anyone (DIY or commercial) actually analyzed the pressure and airflow situation to figure out the best location and flow direction for vents? There should be good pressure under there from the radiator outflow, it's just a question of where the best place to exhaust it is. Are the GTR-style NACA ducts intended to draw air out and forward via the airflow that likely reverses at the base of the windshield? The CarbonSignal vents (rearward flowing up the sides) could work, too, but it would just be nice to see some real pressure/flow proof.

Just run no hood.

DIGItonium · 07-19-2013, 01:14 PM

I have access to a Fluke thermal imaging camera at work. When get my car back from the body shop I'll ask one of the guys to grab some images of my hood with and without the fan running. Temps should be in the 90s, so I'm curious to see how much hot air is flowing out of the vents. I'm just hoping for something lol.

takjak2 · 07-20-2013, 09:30 AM

Quote:

Originally Posted by wstar

Has anyone (DIY or commercial) actually analyzed the pressure and airflow situation to figure out the best location and flow direction for vents? There should be good pressure under there from the radiator outflow, it's just a question of where the best place to exhaust it is. Are the GTR-style NACA ducts intended to draw air out and forward via the airflow that likely reverses at the base of the windshield? The CarbonSignal vents (rearward flowing up the sides) could work, too, but it would just be nice to see some real pressure/flow proof.

No, we haven't and we should. Behind the radiator is probably the highest pressure area that we want to release. Above the headers is the hottest area but there isn't much airflow going up from there. Vents won't do a whole lot to cool the intake tubes, but the hot metal everyone with G3s runs robs power.

07-17-2013, 10:54 AM	#31 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 16	Anyone try to DIY OEM vented hood like the S2000 guys do? edub370 and MyKindaGuise like this.

07-17-2013, 11:06 AM	#32 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 16	Found an old thread here Glambutang likes this.

07-17-2013, 03:19 PM	#36 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Aero Jacket I received a one-off vented hood from Aero Jacket, which makes use of the OEM hood and is based off the one on Jamaica@UAMotorsports car. It's pretty rough and requires a bit of work from the body shop, but I rather have this custom vented hood than a CF vented hood or anything with protruding add on vents. I'm just crossing my fingers that it'll turn out well. I'll work underneath to improve stability and aesthetics at a later time... looks pretty gross underneath haha. Nut_N_Much likes this. __________________ Last edited by DIGItonium; 05-27-2015 at 10:07 AM.

07-17-2013, 03:49 PM	#37 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	Yeah looks pretty rough but the vent placement is probably the best for extracting heat right after the radiator. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

07-17-2013, 04:27 PM	#39 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Yea, they cut out a section underneath to clear the path to cut the exposed section of the hood. The line in the pic was partially cut to help fold the flap, which was a bit delicate. To hold them in place, they used some fiber and epoxy. The vent gap is about 1" wide, so hopefully it's enough to vent something. I'm told their drift cars have these vents as well. The shop handling my car specializes in auto body repair and PDR, and they're not too excited about custom work like this. The tech will use an epoxy that can adhere to aluminum (possibly same as what he's using for PDR of the body panels). He will try to fill and clean the epoxy and weave section, and also deburr some sharp and rough edges. I'm told it'll take about 8 hours of labor. In the near future I might try to go back underneath the hood to clean up the work, add grills and some reinforcement as well. If I decide to add some silver foil tape, it'll be for the vented section since I want the hood to dissipate heat - not reflect it back. It is a lot of work, and I hope my car doesn't have to endure a freak hail and wind storm like this again... just one more year till I get a hold of a beater car haha. __________________ Last edited by DIGItonium; 07-17-2013 at 04:30 PM.

07-17-2013, 03:09 PM	#35 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Not sure how that would work on a Z. Location of the support ribs might not allow for a look like that.

07-17-2013, 05:44 PM	#40 (permalink)
Voice59 Premium Member Join Date: Sep 2011 Location: Va Beach, Virginia Posts: 1,418 Drives: 2009 Nissan 370z Rep Power: 15	I got the Seibon GTR style hood. I guess it's designed so water can't really get in unless it's being forced upward onto the hood. Even driving through rain I've never had a problem with "large" amounts of water getting in there. Jasonle and BeemaaZ like this.

07-18-2013, 12:18 PM	#41 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Mine. CarbonSignal's vented hood quagmire87 likes this. __________________ My Z Build UniqueZ

07-19-2013, 12:36 PM	#42 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Has anyone (DIY or commercial) actually analyzed the pressure and airflow situation to figure out the best location and flow direction for vents? There should be good pressure under there from the radiator outflow, it's just a question of where the best place to exhaust it is. Are the GTR-style NACA ducts intended to draw air out and forward via the airflow that likely reverses at the base of the windshield? The CarbonSignal vents (rearward flowing up the sides) could work, too, but it would just be nice to see some real pressure/flow proof. __________________ 7AT Track Car! Journal thread / Car setup details

07-19-2013, 01:14 PM	#44 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	I have access to a Fluke thermal imaging camera at work. When get my car back from the body shop I'll ask one of the guys to grab some images of my hood with and without the fan running. Temps should be in the 90s, so I'm curious to see how much hot air is flowing out of the vents. I'm just hoping for something lol. __________________ Last edited by DIGItonium; 07-19-2013 at 01:17 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 10:24 AM
Custom vented hood	Zeto	Nissan 370Z General Discussions	77	11-11-2014 04:43 PM
SOCAL: SD - Carbon Fiber vented hood brand new	Marco_xyz	Parts for sale (Private Classifieds)	39	03-01-2011 08:06 PM
40th Ann. 370z w/carbon fibre vented hood, and Nismo Front Bumper	ocean.mirage	Member's 370Z Gallery	20	11-02-2010 09:53 AM