Window Tint peeling issue

Danny3.7 · 01-17-2010, 10:03 PM

Quote:

Originally Posted by OMGWTFBBQ

I wasn't even aware Versas could reach 60mph.

Anyways, make sure your tint person clamps the door button down while installing the tint. This way, the window rolling up when you close the door won't be an issue. In addition, a lot of tint places (the one that I chose included) slide the tint half an inch or so underneath the inner weather stripping so even if you were to roll your windows up and down, it wouldn't peel at all.

Or they usually just unscrew the door ajar sensor in the door jam.

rudi · 01-19-2010, 02:55 PM

Quote:

Originally Posted by Danny3.7

Or they usually just unscrew the door ajar sensor in the door jam.

Doing that would worry me that some one would close one of the doors with the window up.

huudoo · 02-16-2015, 08:52 PM

Quote:

Originally Posted by Danny3.7

Or they usually just unscrew the door ajar sensor in the door jam.

as stated above, their are 1 screws on each door jam,
light switch has a rubber boot around it remove the screws so the windows don't auto roll down and up...
...u can shot the doors with the windows up just don't slam them
let the tint seal for 2 days and you should not have that problem.
that's what I did and it worked fine....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window Tint	rudi	Australia/New Zealand	31	06-11-2018 06:05 PM
Window Issue. Anyone else?	In2Deep	Exterior & Interior	19	04-06-2018 11:53 AM
Clear Bra and 35% Window Tint on Platinum Graphite	VCuomo	Exterior & Interior	19	02-05-2011 03:51 PM
Window Tint Toronto, legal limit in Canada?	CAN-ZED	Exterior & Interior	3	09-29-2009 07:15 PM
Variable Window Tint \| Changes on the spot	nogoodname	Nissan 370Z General Discussions	33	09-15-2009 03:09 PM