Coolerworx Shifter Assembly (Dealers)

redondoaveb · 10-11-2019, 04:58 PM

Quote:

Originally Posted by TheTripleC

Nice, nice, thanks man! Aside from fitment, my main concern was whether or not it was well suited to daily driving and not just track days etc..

I like it for daily. I know there are some other guy's on the forum that daily with it also.

TheTripleC · 10-14-2019, 10:26 AM

Quote:

Originally Posted by redondoaveb

I like it for daily. I know there are some other guy's on the forum that daily with it also.

Killer- thanks again man!

I just heard back from coolerworx and they said the latest version has eliminated vibrations etc so yeah, pretty pumped to get one of these now!

justin_boy · 02-19-2020, 11:06 PM

sorry to revive from the dead....just read about updating the tranny mount. Im running completely stock motor, so the trans wont be under any extra pressure. do you guys think ill be good without running a new one. I plan on changing it later if and when the csc fails

redondoaveb · 02-20-2020, 12:21 AM

Quote:

Originally Posted by justin_boy

sorry to revive from the dead....just read about updating the tranny mount. Im running completely stock motor, so the trans wont be under any extra pressure. do you guys think ill be good without running a new one. I plan on changing it later if and when the csc fails

You need to lower the rear of the tranny to remove the old shifter cradle, might as well put in a new poly mount at the same time. Too easy.

madwi · 02-20-2020, 12:27 AM

Quote:

Originally Posted by redondoaveb

You need to lower the rear of the tranny to remove the old shifter cradle, might as well put in a new poly mount at the same time. Too easy.

It is only two bolts holding the mount on.

justin_boy · 02-20-2020, 09:41 AM

Damn I didn’t order it! And I was getting it installed today

I’ll try to squeeze this in

justin_boy · 02-20-2020, 03:23 PM

just ordered the part overnight to the shop im getting it installed on! no instructions

im gonna send them the install thread to see if they could work it off that

thank you guys for the help

NorthStyle · 02-20-2020, 06:11 PM

If they follow the instructions I posted they won't have any issues with installation, and I didn't even lower the transmission to install mine (although would've saved 20 minutes of cursing and banged up fingers)

justin_boy · 02-20-2020, 10:13 PM

Quote:

Originally Posted by NorthStyle

If they follow the instructions I posted they won't have any issues with installation, and I didn't even lower the transmission to install mine (although would've saved 20 minutes of cursing and banged up fingers)

thank you lol, i just sent them this thread lol im excited!!!!

Overlimit · 03-25-2020, 01:50 AM

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

BettyZ · 09-14-2020, 12:24 AM

Quote:

Originally Posted by Overlimit

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

Yes. The rattling is horrible. 3rd and 4th gear after 3k rpm, the reverse lockout internal cable is rattling/vibrating the hell out of its external. I contacted coolerworx twice and received no response. The rattle legitimately makes the Z undriveable in 3rd and 4th gear; the sound is beyond distracting and into the realm of "drives you batsh*t."

I'm pulling this trash shifter out and installing something that doesn't make me want to tear my ears off. It's a damn shame bc aside from the rattle the shifter is great.

Sent from my SM-G955U using Tapatalk

JARblue · 09-15-2020, 04:39 PM

Quote:

Originally Posted by BettyZ

Yes. The rattling is horrible. 3rd and 4th gear after 3k rpm, the reverse lockout internal cable is rattling/vibrating the hell out of its external. I contacted coolerworx twice and received no response. The rattle legitimately makes the Z undriveable in 3rd and 4th gear; the sound is beyond distracting and into the realm of "drives you batsh*t."

I'm pulling this trash shifter out and installing something that doesn't make me want to tear my ears off. It's a damn shame bc aside from the rattle the shifter is great.

I'll take it

Rusty · 09-15-2020, 07:00 PM

Quote:

Originally Posted by JARblue

I'll take it

Think you would take a used condom if you thought it didn't have any holes in it.

JARblue · 09-15-2020, 07:49 PM

Quote:

Originally Posted by Rusty

Think you would take a used condom if you thought it didn't have any holes in it.

Why does that matter?

NorthStyle · 09-15-2020, 02:09 PM

Quote:

Originally Posted by Overlimit

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

I'm pretty sure mine does it every now and then... but after having it so long I either subconsciously tune it out or my music drowns it out.

02-20-2020, 09:41 AM	#6 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8368	Damn I didn’t order it! And I was getting it installed today I’ll try to squeeze this in redondoaveb likes this.

02-20-2020, 03:23 PM	#7 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8368	just ordered the part overnight to the shop im getting it installed on! no instructions im gonna send them the install thread to see if they could work it off that thank you guys for the help redondoaveb likes this.

02-20-2020, 06:11 PM	#8 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,309 Drives: 2011 370Z Nismo Rep Power: 24278	If they follow the instructions I posted they won't have any issues with installation, and I didn't even lower the transmission to install mine (although would've saved 20 minutes of cursing and banged up fingers) madwi, justin_boy and redondoaveb like this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 03:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 09:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 12:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 03:03 AM

02-19-2020, 11:06 PM	#3 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8368	sorry to revive from the dead....just read about updating the tranny mount. Im running completely stock motor, so the trans wont be under any extra pressure. do you guys think ill be good without running a new one. I plan on changing it later if and when the csc fails

03-25-2020, 01:50 AM	#10 (permalink)
Overlimit Base Member Join Date: Jun 2010 Location: 951 Posts: 151 Drives: F80 M3 Rep Power: 34	Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?