Coolerworx Shifter Assembly (Dealers)

justin_boy · 09-16-2020, 05:10 PM

Quote:

Originally Posted by madwi

Not burn your hand hot but warm.

I would say right in between there....mine gets pretty hot. something i should get checked? I also have a poly trans mount if that matters

justin_boy · 09-16-2020, 05:11 PM

Quote:

Originally Posted by BettyZ

it gets warm but not painfully.

Sent from my SM-G955U using Tapatalk

sometimes mine is smokin lol

edub370 · 11-20-2020, 06:56 PM

Has anyone found a remedy to the rattle on these yet?

redondoaveb · 11-20-2020, 07:10 PM

Quote:

Originally Posted by edub370

Has anyone found a remedy to the rattle on these yet?

It appears it's coming from the reverse lockout cable. The inner cable rattles against the outer casing. BettyZ shot some grease down into his cable a while back and it stopped. He hasn't mentioned if it's still good though.

madwi · 11-21-2020, 07:44 AM

Quote:

Originally Posted by edub370

Has anyone found a remedy to the rattle on these yet?

I heard rumors the newest version doesnt rattle. No idea if true or not though.

redondoaveb · 11-21-2020, 09:08 AM

Quote:

Originally Posted by madwi

I heard rumors the newest version doesnt rattle. No idea if true or not though.

Then they know the first version was defective and should replace them free of charge. Might have to contact them.

BettyZ · 11-21-2020, 10:31 AM

Quote:

Originally Posted by redondoaveb

It appears it's coming from the reverse lockout cable. The inner cable rattles against the outer casing. BettyZ shot some grease down into his cable a while back and it stopped. He hasn't mentioned if it's still good though.

The rattle came back. I'm unsure if it's coming from the lockout cable or from the rod-thingy that the cable pulls on. I've noticed it only rattles in 3rd and 4th gears. Those are the only two gears where the the tiny hex bolts to either side of the rod-thingy are not in contact with the rod-thingy. So perhaps the vibration is starting there? The world may never know..

BettyZ · 11-21-2020, 10:32 AM

Quote:

Originally Posted by redondoaveb

Then they know the first version was defective and should replace them free of charge. Might have to contact them.

Contacted them three times. No responses the first two times. Third time I obliquely threatened to blow them up on social mediaZ. I got a response saying they were looking into it. Then they stopped responding again.

Coolerworx customer support sucks sweaty ballZ.

justin_boy · 11-21-2020, 12:09 PM

Quote:

Originally Posted by BettyZ

Contacted them three times. No responses the first two times. Third time I obliquely threatened to blow them up on social mediaZ. I got a response saying they were looking into it. Then they stopped responding again.

Coolerworx customer support sucks sweaty ballZ.

try hitting up coolerworx canada on fb, theyre really helpful. also mine rattles like crazy in 3rd and 4th

redondoaveb · 11-21-2020, 07:49 PM

I sent Coolerworx a PM on Facebook today and let them know that a bunch of us are having rattling issues and that I understand that the issue has been remedied and I would like to know what the fix is. They replied and said they would get back to me on Monday. Let's see if they follow up with a reply.

BettyZ · 11-21-2020, 08:26 PM

Quote:

Originally Posted by redondoaveb

I sent Coolerworx a PM on Facebook today and let them know that a bunch of us are having rattling issues and that I understand that the issue has been remedied and I would like to know what the fix is. They replied and said they would get back to me on Monday. Let's see if they follow up with a reply.

They'll probably send you a gif of a kokshifter.

Sent from my SM-G955U using Tapatalk

redondoaveb · 11-21-2020, 08:49 PM

Quote:

Originally Posted by BettyZ

They'll probably send you a gif of a kokshifter.

Sent from my SM-G955U using Tapatalk

Great, I have something to look forward to.

BettyZ · 11-22-2020, 12:46 AM

Quote:

Originally Posted by redondoaveb

Great, I have something to look forward to.

Like your garage floor design?

Sent from my SM-G955U using Tapatalk

edub370 · 11-23-2020, 01:18 PM

so uhh... any word?

Leingod · 11-23-2020, 04:49 PM

I'll contact Evo-R. Maybe they know each other.

11-20-2020, 06:56 PM	#93 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	Has anyone found a remedy to the rattle on these yet? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

11-21-2020, 07:49 PM	#100 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,297 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I sent Coolerworx a PM on Facebook today and let them know that a bunch of us are having rattling issues and that I understand that the issue has been remedied and I would like to know what the fix is. They replied and said they would get back to me on Monday. Let's see if they follow up with a reply. JARblue, Rusty, Hotrodz and 2 others like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

11-23-2020, 01:18 PM	#104 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	so uhh... any word? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

11-23-2020, 04:49 PM	#105 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	I'll contact Evo-R. Maybe they know each other. Rusty and Hotrodz like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 03:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 09:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 12:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 03:03 AM