FE-Design Carbon Fiber Fender Vents

Hotrodz · 02-12-2019, 09:53 PM

So that is how is gonna be!

Sent from my SM-G965U using Tapatalk

VABAM · 02-12-2019, 10:07 PM

Quote:

Originally Posted by Hotrodz

So that is how is gonna be!

Sent from my SM-G965U using Tapatalk

gbrettin · 02-13-2019, 02:16 PM

It's gonna sit with all my other parts.

Sent from my SM-G930P using Tapatalk

VABAM · 02-14-2019, 11:39 AM

Mine arrived today! Just talked with derraj06 looks like everyone is getting a 3D template which was a nice surprise.

Rusty · 02-14-2019, 03:25 PM

My vents came today.

A day early.

gbrettin · 02-14-2019, 09:19 PM

Bam!

Sent from my SM-G930P using Tapatalk

madwi · 02-15-2019, 01:07 PM

Very nice looking.

FE Design · 03-01-2019, 10:52 PM

Important Announcement:

We are reaching out to our Fender Vents customers that bought for the 350z.

We recently discovered the Fender Vents have clearance issue with the 350z. Apparently the car frame of the 370z sits a little lower than the 350z with respect to the Fender.

Although the Fender Vents sit flush with the Fender, the inward flange of the Fender Vent interferes and will not work without modification.

Please reach out to us if you would like to return to us for a full refund. We apologize for this inconvenience.

cooltoy · 03-01-2019, 11:18 PM

So the problem is with the 350Z?

madwi · 03-01-2019, 11:42 PM

Quote:

Originally Posted by cooltoy

So the problem is with the 350Z?

Yep.

Krylon · 03-29-2019, 09:55 AM

Has anyone given the thought to use 3M VHB on the vents vice rivets and epoxy? I can't think of many issues other than the possibility of a slight spacing between the fender and the vent. I was looking at 3M VHB #4618 that has a thickness of .64mm.

gbrettin · 03-29-2019, 02:05 PM

I was gonna look into 3m. That's what I have on my wing, it should be fine.

Sent from my SM-G930P using Tapatalk

02-12-2019, 09:53 PM	#1 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	So that is how is gonna be! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-14-2019, 11:39 AM	#4 (permalink)
VABAM A True Z Fanatic Join Date: May 2010 Location: No Where VA Posts: 4,003 Drives: with VDC off. Rep Power: 198	Mine arrived today! Just talked with derraj06 looks like everyone is getting a 3D template which was a nice surprise. __________________ 2009 370Z Touring W/SP

02-14-2019, 03:25 PM	#5 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,579 Drives: 2011 Nismo GM 6M Rep Power: 2684440	My vents came today. A day early. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-01-2019, 11:18 PM	#9 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243725	So the problem is with the 350Z? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finite Element Design Fender Vents	cv129	Exterior & Interior	7	06-07-2018 07:17 PM
[WTB] Wtb:) carbon fiber fender	TaiShu	Parts for sale (Private Classifieds)	0	06-30-2017 07:10 PM
[FOR SALE] Carbon Signal 2 piece fender with extended vents!	Kaden44	Parts for sale (Private Classifieds)	7	03-05-2016 07:22 PM
[FOR SALE] Carbon Fiber GTR Hood Vents	Alexwallace23	Parts for sale (Private Classifieds)	4	05-05-2014 08:55 PM
Help Us Develop The Design For New Carbon Fiber Engine Covers	Mike@Blackline	Exterior & Interior	21	11-12-2009 07:53 PM

02-13-2019, 02:16 PM	#3 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,304 Drives: Tricycle Rep Power: 589452	It's gonna sit with all my other parts. Sent from my SM-G930P using Tapatalk

02-14-2019, 09:19 PM	#6 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,304 Drives: Tricycle Rep Power: 589452	Bam! Sent from my SM-G930P using Tapatalk

02-15-2019, 01:07 PM	#7 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684430	Very nice looking.

03-29-2019, 09:55 AM	#11 (permalink)
Krylon Base Member Join Date: Nov 2015 Location: Virginia Posts: 153 Drives: 370Z Rep Power: 21	Has anyone given the thought to use 3M VHB on the vents vice rivets and epoxy? I can't think of many issues other than the possibility of a slight spacing between the fender and the vent. I was looking at 3M VHB #4618 that has a thickness of .64mm.

03-29-2019, 02:05 PM	#12 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,304 Drives: Tricycle Rep Power: 589452	I was gonna look into 3m. That's what I have on my wing, it should be fine. Sent from my SM-G930P using Tapatalk