400 whp on N/A VQ possible?

Elmo370z · 05-26-2016, 12:20 PM

Quote:

Originally Posted by lhinojos

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Thats sasha from onpoint dyno. That was testing for a BGTV for his build in Australia. He is also running a motec, that itself is like 10 grand. That car is a vq35 with a 370z oem crank i believe.

BGTV8 · 05-26-2016, 03:32 PM

Quote:

Originally Posted by Elmo370z

Thats sasha from onpoint dyno. That was testing for a BGTV for his build in Australia. He is also running a motec, that itself is like 10 grand. That car is a vq35 with a 370z oem crank i believe.

Correct, Sasha's engine is a VQ35HR block, race ported heads, JWT GrandAm spec pistons (12.5:1) and OEM 3.7 litre crank. My build is essentially the same but with a 92mm stroke crank for 4.0 litres.

Sasha runs race gas, I plan E85 so I can go higher in compression (13.5:1 at least).