400 whp on N/A VQ possible?

lhinojos · 05-26-2016, 11:44 AM

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Elmo370z · 05-26-2016, 12:50 PM

Quote:

Originally Posted by lhinojos

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Thats a gnarly set up. I cant afford dry sump and hr head swap to do ITB's. I have plan next year to come close to 400whp on the vvel heads and still staying NA.

Elmo370z · 05-26-2016, 01:20 PM

Quote:

Originally Posted by lhinojos

This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a

Might be some help?
https://youtu.be/9u4hrFG4N70

Thats sasha from onpoint dyno. That was testing for a BGTV for his build in Australia. He is also running a motec, that itself is like 10 grand. That car is a vq35 with a 370z oem crank i believe.

BGTV8 · 05-26-2016, 04:32 PM

Quote:

Originally Posted by Elmo370z

Thats sasha from onpoint dyno. That was testing for a BGTV for his build in Australia. He is also running a motec, that itself is like 10 grand. That car is a vq35 with a 370z oem crank i believe.

Correct, Sasha's engine is a VQ35HR block, race ported heads, JWT GrandAm spec pistons (12.5:1) and OEM 3.7 litre crank. My build is essentially the same but with a 92mm stroke crank for 4.0 litres.

Sasha runs race gas, I plan E85 so I can go higher in compression (13.5:1 at least).

05-26-2016, 11:44 AM	#1 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 16	This dude was running 420hp with a slightly built vq on 53mm itb's. He's going for 450 n/a Might be some help? https://youtu.be/9u4hrFG4N70 Rusty and carlitos_370z like this.