|
one thing is for sure they are using a totally different kit BC Stroker GTM stroker You can see the differences in the pistons, rods, and crank. Look at the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
04-07-2014, 04:38 PM
|
#21 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7251   |
one thing is for sure they are using a totally different kit
BC Stroker GTM stroker  You can see the differences in the pistons, rods, and crank. Look at the skirts of the pistons, the rod journal through holes, and the big ends on the rods they are totally different. The GTM stroker is 96mm vs 88mm for BC, so a BC kit sleeved is 4.15 where as the GTM stroker is 4.2 Unsleeved. Sleeved engines are harder on head gaskets so if its a DD it is usually better to go unsleeved, if its an all out racer then sleeve it.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 4.5 Stroker kit for the VQ37 | jcast_0089 | Engine & Drivetrain | 2 | 06-23-2013 05:39 PM |
| 4.2 stroker with stage 2 | Z eliminator | Forced Induction | 34 | 08-15-2012 10:13 PM |
| FS/FT: My 03 Dakota R/T w/6.7L Stroker & 08 ZX10R | Mythic | Other Vehicle For sale | 1 | 07-01-2012 10:45 PM |
| GTM Stroker Kit | NIZZING | Forced Induction | 6 | 04-14-2011 11:36 AM |
| GMT 4.2L and 4.5L stroker kit pros and cons | Mjthind | Engine & Drivetrain | 79 | 02-14-2011 06:44 PM |
23Likes
Threaded Mode
