Gas Pedal Delay

ZeN

Gents, it is 33-38 degC plus humid all year long here in Malaysia, i've been having this trottle delay since my 1st day ownership. Have anyone tried use another IAT sensor which has the same resistance curve as OEM and relocate it to the mouth of the intake? It is embarrassingly slow to take off in any low gear when the rpm is around 1-3k, above that it scream all the way to redline. In a heavy traffic jam, IAT is always about 40-50 degC above cabin ambient temp reading, i logged all this with OBD2 and Nissan Datascan III app since the car is JDM. No issue with brake switch as i can see the value for both sensor switched. Idle timing was awfully low at about 3 compared to 9 when cold start. The only thing i've been wanting to check is the knock register and MAP sensor barometer volt value but theres no parameter of it in the Android app i have, no codes either. Maybe that was caused of the timing retard, had checked flexplate and theres no crack. Also have tried removing the MAP sensor driving with CEL codes and it didnt improve or making it worst. Happen on either full tank of fuel or low. Only good temporary solution that work only for short period of time ~15 mins is refuelling when near empty ~ 40 litre. Nissan tech had even datalog with consult III while me driving and cant find anything wrong.

Intake were all stock with addition of 36 row Z1 oil cooler and 25 row AT cooler to the sides. I really hopes we as a community get to solve this teething heatsoak issue. Car had 125000 KM already since i daily drive it to work since 2010. My next fault finding would be to replace MAP sensor and see if it is faulty. Envy you guys in colder climate country.