What new under-hood Performance Parts would you like to see from COBB Tuning?

Originally Posted by 1slow370

we all really want a really nice tunning solution. if you can get the vvel hammered out, at least a protuner release, and then maybe add a box to it that could do what the turboxs utec does only make it so it doesn't break easily or stop working. these cars really need F.I. and features like the built in boost control, extra solenoid control, the 2 step rev limiter/launch control, ability to add a map sensor for high boost, and some of the other features the utec had were great if only the damn thing lasted more than a year.

so far as engine parts, bigger radiator or some add on radiators would be nice, maybe some bigger rails that could come with some extra ports for a gauge, and some nice hard pipe assemblies that could let you run either singe or return line with a fuel pressure regulator(and the little pieces that go in the pump assembly to make that happen). for the single line it would be nice if it cleaned up the stock fuel lines in the engine bay so you could just pull the old stuff, pop on the new rails, screw the new hard pipes into the back of the rails, screw the regulator onto that and then have the factory fitting for the stock line so that just snaps in. for the twin rails it would be nice to have a packaged kit that had new larger lines, pump, sending unit adapters, regulator and all the fittings needed so you could just have the kit shipped to your garage and put it on in one day without having to order/cut lines or install fittings.

if you could make a gauge and harness combo that could use the factory wide band sensors that would be awesome, as its a waste to not be able to tap into the factory 5v front o2 sensors, and have to install bungs, and adding another sensor to the car. also nice dash 4 gauge cluster panel that could easily go in place of the useless cubby would be freakin awesome(as well as a good seller)