What oil pressure gage is everyone using?

Averying · 10-13-2023, 09:40 PM

Quote:

Originally Posted by MotorvateDIY

Seems odd to quote myself.... Anyways, here is a small update:

This afternoon, I assembled the CAN bus sensor server and programmed it. It reads the analog sensor input, (pressure, temperature or something else) sends out the CAN bus data and works as it should. Fricken fantastic!

I've told Eugene and will be connecting with him tomorrow to see how/when testing with EcuTeck can happen.

Thanks for the update! A fellow Z owner told me that he already has an oil pressure input feature with his ECUTEK tune via RSenthalpy. Do you know how they’re doing this and/or if it is similar to what you’re doing?

Sent from my iPhone using Tapatalk

Spooler · 10-05-2023, 09:58 PM

There are many good reasons to go to a standalone. The only negative is the cost. It's not cheap.

2011 Nismo#91 · 10-06-2023, 05:42 AM

Prosport EVO.
DIY: Oil Pressure Gauge

abm89 · 10-06-2023, 01:52 PM

Haltech iC-7 haha. I had a VLS gauge and just programmed the voltages into the haltech dash.

MotorvateDIY · 10-06-2023, 02:34 PM

Here is what I use on my G37:

It uses the "GTR MFD gauges" that are part of the navigation system in 2010-2013 G37, 2010-2020 370z and a bunch of other Nissan/Infiniti vehicles.

m3clubracer · 10-09-2023, 07:59 AM

Soooo after driving this car for ~100mi after the R&R of gallery gaskets I got a bad miss and P0300 as well as P0021 but NOT P0524??? WTF is this all about? There is another person with this issue on MYG37.

loon · 10-09-2023, 12:32 PM

Quote:

Originally Posted by m3clubracer

Soooo after driving this car for ~100mi after the R&R of gallery gaskets I got a bad miss and P0300 as well as P0021 but NOT P0524??? WTF is this all about? There is another person with this issue on MYG37.

I’m seeing CAM Position Sensor online…

Sent from my iPhone using Tapatalk

10-06-2023, 05:42 AM	#3 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,413 Drives: slowly Rep Power: 40571	Prosport EVO. DIY: Oil Pressure Gauge m3clubracer likes this. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

10-06-2023, 01:52 PM	#4 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,390 Drives: 11 370Z, 2x Kawasaki Rep Power: 64765	Haltech iC-7 haha. I had a VLS gauge and just programmed the voltages into the haltech dash. __________________ Complete Parts List: https://github.com/abm89/ztouge-build Last edited by abm89; 10-06-2023 at 01:55 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Pressure Graph & WOT Pressure Drop	MotorvateDIY	Engine & Drivetrain	2	04-26-2022 04:22 PM
Fuel Gage stuck .. indicating near full	sancle	Exterior & Interior	3	06-25-2013 03:22 PM
Fuel Temperature Gage Cover 2013 Available?	cinellipro	Exterior & Interior	28	02-24-2012 09:31 AM
Where Is The Oil Gage ??	MY1STZ	Engine & Drivetrain	2	09-07-2010 02:22 AM
Fuel gage indicator	fxroar	Exterior & Interior	12	01-10-2010 11:05 AM

10-05-2023, 09:58 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,153 Drives: 2013 Nismo 370z Rep Power: 2684394	There are many good reasons to go to a standalone. The only negative is the cost. It's not cheap.

10-09-2023, 07:59 AM	#6 (permalink)
m3clubracer Base Member Join Date: Nov 2015 Location: Charlotte Posts: 9 Drives: G37x (also F80M3) Rep Power: 11	Soooo after driving this car for ~100mi after the R&R of gallery gaskets I got a bad miss and P0300 as well as P0021 but NOT P0524??? WTF is this all about? There is another person with this issue on MYG37.