VVEL issue, at my wits end

sirnixalot

I have checked the relay is seated properly.


Here is what I have confirmed. Using a wrench to turn the vvel shaft to minimum position yields 0* vvel angle on bank one and 1.39* on bank 2. This includes adjusting the position sensors to see when the angle value starts to change.

Is my logic sound that I have ruled out any mechanical issue?

I have toned out the bank 2 vvel position sensor to the vvel ecu and all wires come back 0 ohms. I may have something else going on with the wiring harness but I haven’t tracked it down as yet.

__________________
2010 Sport - LS3 swap loading
2012 Frontier - BTWTuning VK56DE swap