Oil Catch Cans...

robbieZ208 · 03-21-2021, 02:21 PM

Quote:

Originally Posted by mlsully

These are the ones I bought. It’s only 2 port, so you have to use 2 or add a “T” into your line for each side. Picture of what mine looks like installed with braided hoses.

Ruien Polish Baffled Universal Aluminum Oil Catch Can Reservoir Tank Red https://www.amazon.com/dp/B06XJTV45H?ref=yo_pop_ma_swf

Link to the ss lines?

Sent from my LM-Q730 using Tapatalk

Rusty · 03-21-2021, 06:20 PM

Quote:

Originally Posted by robbieZ208

Link to the ss lines?

Sent from my LM-Q730 using Tapatalk

I got my ss hose from Jegs along with the AN fittings. The hose and fittings will cost more than the catch cans.

robbieZ208 · 03-26-2021, 01:16 PM

Quote:

Originally Posted by Rusty

I got my ss hose from Jegs along with the AN fittings. The hose and fittings will cost more than the catch cans.

Does the "an" matter? How long of hoses do i need?. A link would work best, jegs website doesnt seem to work for me. Thanks.

Sent from my LM-Q730 using Tapatalk

Rusty · 03-26-2021, 03:57 PM

Quote:

Originally Posted by robbieZ208

Does the "an" matter? How long of hoses do i need?. A link would work best, jegs website doesnt seem to work for me. Thanks.

Sent from my LM-Q730 using Tapatalk

If you want to use braided stainless hose. You should use the AN fittings. I don't know what size your cans are. On mine, I use -8 hose.

https://www.jegs.com/i/Vibrant-Perfo...18418/10002/-1

robbieZ208 · 03-26-2021, 05:10 PM

I got the same amazon cans as Mlsully. I was hoping to find the same or similar hoses and fittings

Sent from my LM-Q730 using Tapatalk

Rusty · 03-26-2021, 05:15 PM

Quote:

Originally Posted by robbieZ208

I got the same amazon cans as Mlsully. I was hoping to find the same or similar hoses and fittings

Sent from my LM-Q730 using Tapatalk

I don't know what the thread size is in the can. If it's like mine. I have to dig through some papers later tonight.

robbieZ208 · 03-26-2021, 05:42 PM

Quote:

Originally Posted by Rusty

I don't know what the thread size is in the can. If it's like mine. I have to dig through some papers later tonight.

https://www.amazon.com/dp/B06XJTV45H?ref=yo_pop_ma_swf

Sent from my LM-Q730 using Tapatalk

Rusty · 03-26-2021, 06:25 PM

I had to log into Jegs to find my old order. Here's what I used.

4 of these. These go into the cans.
https://www.jegs.com/i/Earls/361/AT9919EFJERL/10002/-1

10ft length
https://www.jegs.com/i/Earls/361/310008/10002/-1

2 of these. These go on the valve covers.
https://www.jegs.com/i/Fragola-Perfo...80208/10002/-1

4 of these.
https://www.jegs.com/i/Earls/361/AT800108/10002/-1

robbieZ208 · 03-27-2021, 01:24 AM

Quote:

Originally Posted by Rusty

I had to log into Jegs to find my old order. Here's what I used.

4 of these. These go into the cans.
https://www.jegs.com/i/Earls/361/AT9919EFJERL/10002/-1

10ft length
https://www.jegs.com/i/Earls/361/310008/10002/-1

2 of these. These go on the valve covers.
https://www.jegs.com/i/Fragola-Perfo...80208/10002/-1

4 of these.
https://www.jegs.com/i/Earls/361/AT800108/10002/-1

very helpful thank you. 4 hoses right?

Sent from my LM-Q730 using Tapatalk

Rusty · 03-27-2021, 02:20 AM

Quote:

Originally Posted by robbieZ208

very helpful thank you. 4 hoses right?

Sent from my LM-Q730 using Tapatalk

One 10ft hose. You have to cut it to length you need for each section.

Have you ever worked with braided hose?

robbieZ208 · 03-27-2021, 04:11 AM

No first time

Sent from my LM-Q730 using Tapatalk

Rusty · 03-27-2021, 11:46 AM

Quote:

Originally Posted by robbieZ208

No first time

Sent from my LM-Q730 using Tapatalk

The braided hoses don't flex real good. You can't make sharp bends with it. To cut the hose. It's best to tape up the spot with lots of electrical tape. Then cut in the middle of the tape with a cut-off wheel on a die grinder. Don't use a hack saw. You'll tear it up.

You will need this to assemble the hose and fitting together.

https://www.jegs.com/i/JEGS/555/28010/10002/-1

Jayhovah · 04-02-2021, 09:29 AM

Quote:

Originally Posted by robbieZ208

No first time

Sent from my LM-Q730 using Tapatalk

Another thing to keep in mind with SS braided hose - be careful how they are routed and what they might be touching. As things vibrate and the motor rocks under torque, a SS braided hose laying against a soft rubber hose will eventually start wearing a hole into the rubber hose.

I went with silicone hoses for my cans.

03-26-2021, 06:25 PM	#53 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,864 Drives: 2011 Nismo GM 6M Rep Power: 2684436	I had to log into Jegs to find my old order. Here's what I used. 4 of these. These go into the cans. https://www.jegs.com/i/Earls/361/AT9919EFJERL/10002/-1 10ft length https://www.jegs.com/i/Earls/361/310008/10002/-1 2 of these. These go on the valve covers. https://www.jegs.com/i/Fragola-Perfo...80208/10002/-1 4 of these. https://www.jegs.com/i/Earls/361/AT800108/10002/-1 __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine oil catch cans??	newls196	Engine & Drivetrain	40	09-01-2022 01:31 PM
Mishimoto compact Oil catch cans	bimbimbop	Engine & Drivetrain	1	12-26-2017 09:33 PM
[FOR SALE] ARC Overflow/Catch Cans	Ni55anPat	Parts for sale (Private Classifieds)	7	06-28-2017 05:57 PM
Catch Cans on a FI Z	Wiggins3377	Engine & Drivetrain	2	07-07-2016 09:54 AM
Oil Catch cans	DEpointfive0	Engine & Drivetrain	8	10-23-2012 02:31 PM

03-26-2021, 05:10 PM	#50 (permalink)
robbieZ208 Base Member Join Date: Sep 2020 Location: idaho Posts: 19 Drives: 09 nissan 370z bl m6 Rep Power: 4	I got the same amazon cans as Mlsully. I was hoping to find the same or similar hoses and fittings Sent from my LM-Q730 using Tapatalk

03-27-2021, 04:11 AM	#56 (permalink)
robbieZ208 Base Member Join Date: Sep 2020 Location: idaho Posts: 19 Drives: 09 nissan 370z bl m6 Rep Power: 4	No first time Sent from my LM-Q730 using Tapatalk