CSC or CMC problem?

Zatanna Z · 08-19-2017, 01:25 PM

Hey guys I think I'm gonna change my plans and save up more $ and get a clutch and flywheel along with a aftermarket CSC and CMC. My clutch feels just fine on normal driving. Have plenty of pressure. I just won't shift aggressive or stomp the gas at all till I swap all of it :/ what's y'all thoughts on this plan?

Jayhovah · 08-19-2017, 04:38 PM

Quote:

Originally Posted by Zatanna Z

Hey guys I think I'm gonna change my plans and save up more $ and get a clutch and flywheel along with a aftermarket CSC and CMC. My clutch feels just fine on normal driving. Have plenty of pressure. I just won't shift aggressive or stomp the gas at all till I swap all of it :/ what's y'all thoughts on this plan?

That's probably fine. You should consider going ahead and getting the CSC and CMC in case it fails the rest of the way and you need to get it back up and running quickly.

Sent from my Nexus 6P using Tapatalk

Zatanna Z · 08-19-2017, 05:20 PM

Quote:

Originally Posted by Jayhovah

That's probably fine. You should consider going ahead and getting the CSC and CMC in case it fails the rest of the way and you need to get it back up and running quickly.

Sent from my Nexus 6P using Tapatalk

Good idea

Zatanna Z · 08-19-2017, 06:12 PM

Here's what I'm thinking for my set up.

Clutch & Flywheel- https://www.z1motorsports.com/clutch...hr-p-8771.html

CSC- ZSpeed Performance Replacment HD Clutch CSC Heavy Duty Slave Cylinder Kit

Master cylinder- ??? would it be better to go aftermarket with this set up?

Pilot bushing- 300zx 350z 370z G35 G37 Clutch Pilot Bushing

40 to 332 · 08-19-2017, 08:53 PM

I'd go with the Z Speed CMAK kit. It moves the slave cylinder from inside the transmission bell housing to the outside of the housing ... so if the slave ever fails in the future, there is no need to drop the tranny ... saving a lot of trouble and $$. It is more expensive than the standard HD CSC, but well worth the extra $$ IMHO. I'm currently running the CMAK kit with the HD CMC and clutch pedal assembly from RJM Performance. Works great!

jwick · 08-20-2017, 11:47 AM

Quote:

Originally Posted by Zatanna Z

Here's what I'm thinking for my set up.

Clutch & Flywheel- https://www.z1motorsports.com/clutch...hr-p-8771.html

CSC- ZSpeed Performance Replacment HD Clutch CSC Heavy Duty Slave Cylinder Kit

Master cylinder- ??? would it be better to go aftermarket with this set up?

Pilot bushing- 300zx 350z 370z G35 G37 Clutch Pilot Bushing

I'm running the Z1 kit in my turbo build. If you don't have a need for a performance clutch you might not want to take that step. It's going to feel and have the stiffness of a mechanical clutch. I like to refer to mine as like driving a mid-80s F250 diesel. Not impossible in a DD but you'll probably hate it on traffic.

Zatanna Z · 08-20-2017, 01:58 PM

Quote:

Originally Posted by jwick

I'm running the Z1 kit in my turbo build. If you don't have a need for a performance clutch you might not want to take that step. It's going to feel and have the stiffness of a mechanical clutch. I like to refer to mine as like driving a mid-80s F250 diesel. Not impossible in a DD but you'll probably hate it on traffic.

I mean it'd be fun to try a performance set up. I like driving fast

and why do you say I'd hate it in traffic? Is it noisy

Zatanna Z · 08-20-2017, 01:58 PM

Quote:

Originally Posted by 40 to 332

I'd go with the Z Speed CMAK kit. It moves the slave cylinder from inside the transmission bell housing to the outside of the housing ... so if the slave ever fails in the future, there is no need to drop the tranny ... saving a lot of trouble and $$. It is more expensive than the standard HD CSC, but well worth the extra $$ IMHO. I'm currently running the CMAK kit with the HD CMC and clutch pedal assembly from RJM Performance. Works great!

Probably would be smart for the long run

jwick · 08-20-2017, 02:40 PM

Quote:

Originally Posted by Zatanna Z

I mean it'd be fun to try a performance set up. I like driving fast

and why do you say I'd hate it in traffic? Is it noisy

No, it's extremely stiff.

Zatanna Z · 08-20-2017, 02:51 PM

Quote:

Originally Posted by jwick

No, it's extremely stiff.

I think I could prob get used to it. Is yours a daily?

jwick · 08-20-2017, 03:19 PM

Not anymore but I did for the first year I turboed it.

Zatanna Z · 08-20-2017, 05:32 PM

Quote:

Originally Posted by jwick

Not anymore but I did for the first year I turboed it.

How was is as a daily?

Zatanna Z · 08-20-2017, 05:33 PM

Anyone else here run the JWT clutch and flywheel?

Jayhovah · 08-21-2017, 02:50 PM

I daily my Z1 clutch/flywheel (not JWT) and I don't have any problems with it, but it is stiffer than stock. I am with jwick though, there isn't a ton of benefit to upgrading your clutch unless you are planning power mods that necessitate it.... or your OEM one is worn out already.

Chuck33079 · 08-21-2017, 03:03 PM

Not so much the clutch, but there's a very noticeable improvement from swapping to a lighter flywheel. At the cost of a LOT of chatter, though.

08-20-2017, 03:19 PM	#56 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	CSC or CMC problem? Not anymore but I did for the first year I turboed it. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build Last edited by jwick; 08-20-2017 at 04:13 PM.

08-21-2017, 03:03 PM	#60 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Not so much the clutch, but there's a very noticeable improvement from swapping to a lighter flywheel. At the cost of a LOT of chatter, though. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone have this problem?	niznizbobo	Nissan 370Z General Discussions	5	10-01-2011 12:27 PM
Is anyone having this problem?	mecha1000	Nissan 370Z General Discussions	30	01-15-2011 09:28 PM
New Roadster, Spoiler problem, dealer problem	Hello	Nissan 370Z General Discussions	26	01-11-2010 05:22 PM
Possible problem with my Z?	Amon	Nissan 370Z General Discussions	9	12-13-2009 09:01 AM

08-19-2017, 01:25 PM	#46 (permalink)
Zatanna Z Enthusiast Member Join Date: Dec 2016 Location: Nebraska Posts: 254 Drives: 2010 Nissan 370z 6MT Rep Power: 8	Hey guys I think I'm gonna change my plans and save up more $ and get a clutch and flywheel along with a aftermarket CSC and CMC. My clutch feels just fine on normal driving. Have plenty of pressure. I just won't shift aggressive or stomp the gas at all till I swap all of it :/ what's y'all thoughts on this plan?

08-19-2017, 06:12 PM	#49 (permalink)
Zatanna Z Enthusiast Member Join Date: Dec 2016 Location: Nebraska Posts: 254 Drives: 2010 Nissan 370z 6MT Rep Power: 8	Here's what I'm thinking for my set up. Clutch & Flywheel- https://www.z1motorsports.com/clutch...hr-p-8771.html CSC- ZSpeed Performance Replacment HD Clutch CSC Heavy Duty Slave Cylinder Kit Master cylinder- ??? would it be better to go aftermarket with this set up? Pilot bushing- 300zx 350z 370z G35 G37 Clutch Pilot Bushing

08-19-2017, 08:53 PM	#50 (permalink)
40 to 332 Enthusiast Member Join Date: Apr 2013 Location: Kimberley, BC, CANADA Posts: 439 Drives: 13 370Z BS M6 Sport Rep Power: 138	I'd go with the Z Speed CMAK kit. It moves the slave cylinder from inside the transmission bell housing to the outside of the housing ... so if the slave ever fails in the future, there is no need to drop the tranny ... saving a lot of trouble and $$. It is more expensive than the standard HD CSC, but well worth the extra $$ IMHO. I'm currently running the CMAK kit with the HD CMC and clutch pedal assembly from RJM Performance. Works great!

08-20-2017, 05:33 PM	#58 (permalink)
Zatanna Z Enthusiast Member Join Date: Dec 2016 Location: Nebraska Posts: 254 Drives: 2010 Nissan 370z 6MT Rep Power: 8	Anyone else here run the JWT clutch and flywheel?