CSC or CMC problem?

jwick · 08-18-2017, 12:24 PM

Listen to Joe, the man knows what he's talking about.

Zatanna Z · 08-18-2017, 02:04 PM

Quote:

Originally Posted by Joe@ZSpeed

When and if your Slave (CSC) dies this will keep the fluid much cleaner and less maintenance in the long run.
ZSpeed Performance Nissan 300ZX 350Z 370Z Infiniti G35 G37 Q50 Q60

I'm looking into getting this CSC. I would like to get the one you recommended but I'm on a tight budget ATM -_- I also seen it recommend a clutch pilot bushing when replacing the CSC. So how many of those pilot bushings would I need? And will the OEM master cylinder work fine or do you guys have any aftermarket ones?

Jayhovah · 08-18-2017, 02:21 PM

Quote:

Originally Posted by Zatanna Z

I'm looking into getting this CSC. I would like to get the one you recommended but I'm on a tight budget ATM -_- I also seen it recommend a clutch pilot bushing when replacing the CSC. So how many of those pilot bushings would I need? And will the OEM master cylinder work fine or do you guys have any aftermarket ones?

Best thing to do is call him... He will get you set up in a matter of minutes.

Joe@ZSpeed · 08-18-2017, 02:29 PM

Quote:

Originally Posted by Zatanna Z

I'm looking into getting this CSC. I would like to get the one you recommended but I'm on a tight budget ATM -_- I also seen it recommend a clutch pilot bushing when replacing the CSC. So how many of those pilot bushings would I need? And will the OEM master cylinder work fine or do you guys have any aftermarket ones?

Just one pilot bushing is all that's in there, It is in the back of the crankshaft and holds the input shaft centered. Oem master will work fine with this kit.

Zatanna Z · 08-18-2017, 02:34 PM

Quote:

Originally Posted by Joe@ZSpeed

When and if your Slave (CSC) dies this will keep the fluid much cleaner and less maintenance in the long run.
ZSpeed Performance Nissan 300ZX 350Z 370Z Infiniti G35 G37 Q50 Q60

So In the near future I want to order my parts from ZSPEED. I take it you work for ZSPEED? Well I'm not sure if you could help me out or not on this aspect but I called a local transmission shop that does great work and they were acting iffy about me bringing in my own parts. They said they only will sell their parts to me and labor themselves. They said they only do LUK and OEM parts. This is b/c they have their own warranty and they don't like people bringing in pets b/c they have failed before. I told them these pets are better then OEM and it's solid products, they said they might consider doing it. Idk if one of you guys at ZSPEED could talk to them?

Zatanna Z · 08-18-2017, 02:45 PM

Quote:

Originally Posted by Jayhovah

Best thing to do is call him... He will get you set up in a matter of minutes.

That'd be easier

Zatanna Z · 08-18-2017, 03:39 PM

Called another shop and they don't care if I bring my own parts in. They said labor would be $600 does that sound about right or too high?

jwick · 08-18-2017, 03:42 PM

Quote:

Originally Posted by Zatanna Z

Called another shop and they don't care if I bring my own parts in. They said labor would be $600 does that sound about right or too high?

That both CSC and CMC?

Zatanna Z · 08-18-2017, 03:59 PM

Quote:

Originally Posted by jwick

That both CSC and CMC?

Yes

jwick · 08-18-2017, 04:03 PM

That's a pretty good price

Jayhovah · 08-18-2017, 04:03 PM

Quote:

Originally Posted by Zatanna Z

Yes

Seems reasonable to me if it's a good shop. I think I paid $500 in labor for HD CSC, clutch, flywheel, and CMC.

Sent from my Nexus 6P using Tapatalk

jwick · 08-18-2017, 04:04 PM

If you ever thought about swapping the clutch/flywheel, now would be the time.

Zatanna Z · 08-18-2017, 04:14 PM

Quote:

Originally Posted by jwick

If you ever thought about swapping the clutch/flywheel, now would be the time.

Never have had thoughts about that but don't have the extra cash to spare :/ I'm a poor college student lol

jwick · 08-18-2017, 04:29 PM

Pretty nice car for a college student

Zatanna Z · 08-18-2017, 04:37 PM

Quote:

Originally Posted by jwick

Pretty nice car for a college student

I like nice things so I work $40+ hours a week for em lol

08-18-2017, 12:24 PM	#31 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Listen to Joe, the man knows what he's talking about. Jayhovah likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

08-18-2017, 04:03 PM	#40 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	That's a pretty good price __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

08-18-2017, 04:04 PM	#42 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	If you ever thought about swapping the clutch/flywheel, now would be the time. Zatanna Z likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

08-18-2017, 04:29 PM	#44 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	CSC or CMC problem? Pretty nice car for a college student __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone have this problem?	niznizbobo	Nissan 370Z General Discussions	5	10-01-2011 12:27 PM
Is anyone having this problem?	mecha1000	Nissan 370Z General Discussions	30	01-15-2011 09:28 PM
New Roadster, Spoiler problem, dealer problem	Hello	Nissan 370Z General Discussions	26	01-11-2010 05:22 PM
Possible problem with my Z?	Amon	Nissan 370Z General Discussions	9	12-13-2009 09:01 AM

08-18-2017, 03:39 PM	#37 (permalink)
Zatanna Z Enthusiast Member Join Date: Dec 2016 Location: Nebraska Posts: 254 Drives: 2010 Nissan 370z 6MT Rep Power: 8	Called another shop and they don't care if I bring my own parts in. They said labor would be $600 does that sound about right or too high?