Billet Dry Sump VQ37VHR

1slow370 · 01-05-2019, 10:21 PM

Quote:

Originally Posted by DOOMMONKEY777

Why the draining is on one side only? So does this mean that if I am making a loong opposite of the draining turn where all the oil will be pushed to one side, will the crank whip it in to foam and destroy the engine and/plus the draining tubes go vaccum due to oil being pushed to opposite side?

Just wanting to clarify if this is an Engineering disaster.(or not)

The suction ports are onthe windage side of the engine the crank feeds them. Also it doesnt work quite that way the reserve size of the tank is the most important thing and the pan is definetly not the most important part of the kit its the pump followed by the crank setup, pump mount and drive, and vacuum regulation so you dont instantly destroy all the rotating seals in the engine and score the piston by drying the cylinder walls. Oh and filtration and pressure drop between pump and block oil inlet. The pan could literally be a modified factory pan with with the pickup and lower pan removed and welded off and some -12 bungs welded to the side. Just wouldnt work as efficiently.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Billet Dry Sump Set ups for the VQ37VHR From MA-Motorsports!	MAMotorsports	Drivetrain/Engine	38	12-29-2020 11:21 PM
Dry Sump!!	Elmo370z	Engine & Drivetrain	20	02-03-2016 10:13 AM
DIY: Air conditioning for your Sump!.......	Modshack	DIY Section (Do-It-Yourself)	43	06-06-2014 11:15 AM