Dry Sump!!

Elmo370z · 02-02-2016, 03:01 PM

Billet Dry Sump Set ups for the VQ37VHR From MA-Motorsports!

This is the perfect solution for the aam mani, jwt cam and eps big bore tbs.

hooey_b · 02-02-2016, 04:46 PM

What are some of the key benefits to running a dry sump setup vice OEM?

Chuck33079 · 02-02-2016, 04:52 PM

You can rev the motor higher since you don't have to worry about grenading the oil pump. You won't oil starve the motor in a high-g turn. Higher capacity. You also pick up a few hp since you eliminate windage losses.

hooey_b · 02-02-2016, 04:56 PM

Quote:

Originally Posted by Chuck33079

You can rev the motor higher since you don't have to worry about grenading the oil pump. You won't oil starve the motor in a high-g turn. Higher capacity. You also pick up a few hp since you eliminate windage losses.

Looks like I just found another hole for my money to jump into....sheeit.

In comparison to the new CJM baffled oil pan, would the CJM pan suffice if the car isn't subject to excessive strain?

Chuck33079 · 02-02-2016, 04:58 PM

Quote:

Originally Posted by hooey_b

Looks like I just found another hole for my money to jump into....sheeit.

A big hole. It's not a cheap setup, and you lose AC unless you can figure out a way to make a custom setup. The oil pump goes where the AC compressor is.

Quote:

Originally Posted by hooey_b

In comparison to the new CJM baffled oil pan, would the CJM pan suffice if the car isn't subject to excessive strain?

As long as you stick to the factory 7500 rpm limit, a wet sump will be fine on these cars.

hooey_b · 02-02-2016, 05:02 PM

Quote:

Originally Posted by Chuck33079

A big hole. It's not a cheap setup, and you lose AC unless you can figure out a way to make a custom setup. The oil pump goes where the AC compressor is.

I think I remember that on a review...(highest hp NA). I live in GA, and I DO love my AC.

As long as you stick to the factory 7500 rpm limit, a wet sump will be fine on these cars.

Good to know, I need to know my limitations lol...especially with the way I drive. (with a sense of urgency)

Elmo370z · 02-02-2016, 07:03 PM

Chuck this will.win my 6 pack of beer

Chuck33079 · 02-02-2016, 07:18 PM

Quote:

Originally Posted by Elmo370z

Chuck this will.win my 6 pack of beer

You think a bunch of untested parts will let you make more power NA than anyone has ever made by a large amount. It might, it might not. If you come to the table with a 400whp NA vq37, I'll make good on my end.

Elmo370z · 02-02-2016, 07:21 PM

1slowz showed what could be done

Chuck33079 · 02-02-2016, 07:23 PM

Quote:

Originally Posted by Elmo370z

1slowz showed what could be done

And he only hit ~370. You're shooting for 400, right? That's a tall order.

Elmo370z · 02-02-2016, 07:23 PM

If that mani flows like they say im sure woth c-85 tune or race gas with good set of heads will make close or not 400whp

Chuck33079 · 02-02-2016, 07:27 PM

We'll see. They haven't shown any tests on that manifold. Flow isn't the only thing to worry about. You can flow too much and lose velocity. It may do nothing on a NA build. It may make fucktons of power. We'll just have to see what it makes on a third party dyno.

Spooler · 02-02-2016, 07:28 PM

No A/C, No joy..... Just saying.

Elmo370z · 02-02-2016, 07:30 PM

Ill see if i can get a bracket made to keep my ac

BGTV8 · 02-02-2016, 08:45 PM

And there is an alternative ...........

http://www.the370z.com/attachments/e...d-img_9725.jpg

Also manifold .......

http://www.onpointdyno.com/?p=3810

although you could CNC a plenum and run a pair of oversize DBW throttle bodies rather than 6 x itb

02-02-2016, 03:01 PM	#1 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Dry Sump!! Billet Dry Sump Set ups for the VQ37VHR From MA-Motorsports! This is the perfect solution for the aam mani, jwt cam and eps big bore tbs. hooey_b likes this.

02-02-2016, 04:52 PM	#3 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	You can rev the motor higher since you don't have to worry about grenading the oil pump. You won't oil starve the motor in a high-g turn. Higher capacity. You also pick up a few hp since you eliminate windage losses. hooey_b likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-02-2016, 07:27 PM	#12 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	We'll see. They haven't shown any tests on that manifold. Flow isn't the only thing to worry about. You can flow too much and lose velocity. It may do nothing on a NA build. It may make fucktons of power. We'll just have to see what it makes on a third party dyno. GaleForce and Elmo370z like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-02-2016, 07:30 PM	#14 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Ill see if i can get a bracket made to keep my ac imjello likes this.

02-02-2016, 08:45 PM	#15 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	And there is an alternative ........... http://www.the370z.com/attachments/e...d-img_9725.jpg Also manifold ....... http://www.onpointdyno.com/?p=3810 although you could CNC a plenum and run a pair of oversize DBW throttle bodies rather than 6 x itb Last edited by BGTV8; 02-02-2016 at 08:48 PM.

02-02-2016, 04:46 PM	#2 (permalink)
hooey_b Base Member Join Date: May 2015 Location: Atlanta Posts: 126 Drives: 2008 G37S 6MT Rep Power: 9	What are some of the key benefits to running a dry sump setup vice OEM?

02-02-2016, 07:03 PM	#7 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Chuck this will.win my 6 pack of beer

02-02-2016, 07:21 PM	#9 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	1slowz showed what could be done

02-02-2016, 07:23 PM	#11 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	If that mani flows like they say im sure woth c-85 tune or race gas with good set of heads will make close or not 400whp

02-02-2016, 07:28 PM	#13 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	No A/C, No joy..... Just saying.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Billet Dry Sump Set ups for the VQ37VHR From MA-Motorsports!	MAMotorsports	Drivetrain/Engine	38	12-29-2020 11:21 PM
DIY: Air conditioning for your Sump!.......	Modshack	DIY Section (Do-It-Yourself)	43	06-06-2014 11:15 AM
Dry sump oil systems	PEPI	Engine & Drivetrain	11	12-14-2013 04:48 PM