![]() |
Originally Posted by Jordo! No problem -- hope my suggestions help! Can you also make adjustments after datalogging? Can you give me a screenshot of what variables you can datalog
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#24 (permalink) | |
|
Base Member
Join Date: Jun 2015
Location: At Home
Posts: 21
Drives: 2012 G37S 6MT
Rep Power: 12 ![]() |
Quote:
![]() With EcuTek, there is no option like the Uprev tuner license which let you adjust some few factors and tunes. Only a pro tuner who is licensed by EcuTek can do that. Check the log attached, it's a 4th gear pull was taken with the regular 95 RON pump gas. Generally it looks good but the tuner tuned it based on the quality and the Octane of the gas which is the limiting factor for more improvement. You can check the knock corrections occurred during the pull. If there is less or no correction, more timing can be added. I will also try to log the low RPM knocking to get plenty of data which would explain these weird knocking events. I usually open the files on an Excel sheet. Don't know if there is any other programs can show the logs better. |
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A couple Porsche GT3's, a couple BMW M's and a Nismo 350z walk into a bar... 6/8/13 | HKYStormFront | Photography | 9 | 06-13-2013 08:13 PM |
| Opinions On Future Mods?? | MrZ | Nissan 370Z General Discussions | 24 | 01-11-2012 08:54 AM |
| Opinions welcome on mods... | RandyD | Nissan 370Z Roadster (Convertible) | 13 | 08-05-2011 10:22 AM |