Billet Oil Pump Gears and Backing Plate - Group Buy Interest??

Elmo370z · 06-09-2015, 03:31 PM

Just two people are interested in these Gears and backing plate?

Elmo370z · 06-09-2015, 04:49 PM

Just got an email from John at ati and said the damper should be out in about a month. So let's get on this band wagon and see how far it will fly.

imjello · 06-09-2015, 04:55 PM

Quote:

Originally Posted by Chuck33079

Let me know what makes it worth it for you. The interest is definitely there, but the timing is just terrible.

i am in a similar situation on timing, phunk i PM you

GSS138 · 06-09-2015, 06:26 PM

Would be interested. But sell me /tell me why this is a better long term solution than a dry sump.

jwick · 06-09-2015, 06:30 PM

Quote:

Originally Posted by GSS138

Would be interested. But sell me /tell me why this is a better long term solution than a dry sump.

It's not. But not everyone is going to pony up the money required for a dry sump setup

BGTV8 · 06-09-2015, 07:01 PM

I have previously PM'd phunk my interest.

That said, I have a bead on an alternative:
1. External oil pump which I will use in conjunction with the CJM baffled sump and
2. A locally engineered dry-sump here in OZ - no firm price yet but some interesting murmurings (the manufacturer supplies dry-sump kits to the Aussie off-road and desert buggy-racers - about 25% of whom use VQ TT engines in their buggies with the dry-sump system).

Elmo370z · 06-09-2015, 07:02 PM

Roughly around 9 grand for a set up, not including installation cost, this is a good solution to increase revs and oil pump reliability.

phunk · 06-09-2015, 08:03 PM

Quote:

Originally Posted by GSS138

Would be interested. But sell me /tell me why this is a better long term solution than a dry sump.

The thing with a dry sump system is that most people will never actually take the plunge and get one. Its performance and durability is second to none... but they are very expensive and they dont just bolt up to the car - its a lot of custom work and comes with sacrifices of real estate.

So, this is not a better long term solution than a dry sump, but is a better long term solution than the dry sump that was never purchased and installed.

gomer_110 · 06-09-2015, 08:22 PM

Quote:

Originally Posted by Elmo370z

Just two people are interested in these Gears and backing plate?

I'm very interested in this but the issue is I don't want to be a guinea pig on something that could very easily cause the motor to go boom. To be honest, I was hoping a handful of people would jump on this and establish how fast the motor could really be spun safely and then I'd jump on round 2 of this.

Maybe it's wishful thinking but I was really hoping for 8250-8500 RPM with this and Phunk's oil pan.

Elmo370z · 06-09-2015, 09:46 PM

Quote:

Originally Posted by gomer_110

I'm very interested in this but the issue is I don't want to be a guinea pig on something that could very easily cause the motor to go boom. To be honest, I was hoping a handful of people would jump on this and establish how fast the motor could really be spun safely and then I'd jump on round 2 of this.

Maybe it's wishful thinking but I was really hoping for 8250-8500 RPM with this and Phunk's oil pan.

Well prepared to blow your motor. To rev 8500 if I'm correct your going to need an upgraded valve train, new intake system, pistons, rods, new crank? And a manifold O and a damper to balance the harmonics. Don't go out the boundaries of a stock block and you will be happy.

DIGItonium · 06-10-2015, 12:10 AM

Sorry to hijack... have you guys seen these videos? Goodness gracious. 8,500 RPM. What's nice is that I can put it on repeat and not worry about shredding my engine.

Elmo370z · 06-10-2015, 12:37 AM

Quote:

Originally Posted by DIGItonium

Sorry to hijack... have you guys seen these videos? Goodness gracious. 8,500 RPM. What's nice is that I can put it on repeat and not worry about shredding my engine.

I saw those videos, pretty nuts. Need to get this ball rolling

Elmo370z · 06-10-2015, 12:40 AM

Im only going to set my redline to 8000 rpms until dry sump, and built motor funds come into my bank account.

Elmo370z · 06-10-2015, 12:40 AM

Wonder how many people have signed up

Chuck33079 · 06-10-2015, 10:04 AM

Phunk, count me in. Just send out the paypal invoice whenever you want the deposit.

06-09-2015, 06:26 PM	#124 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 13	Would be interested. But sell me /tell me why this is a better long term solution than a dry sump. __________________ Current Mods: Vorpal Weapon +5.

06-10-2015, 12:10 AM	#131 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Sorry to hijack... have you guys seen these videos? Goodness gracious. 8,500 RPM. What's nice is that I can put it on repeat and not worry about shredding my engine. phunk likes this. __________________

06-10-2015, 12:40 AM	#133 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Im only going to set my redline to 8000 rpms until dry sump, and built motor funds come into my bank account. DIGItonium and imjello like this.

06-10-2015, 10:04 AM	#135 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Phunk, count me in. Just send out the paypal invoice whenever you want the deposit. phunk likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any interest in a Volk TE37 SL Group Buy again?	SE	Wheels & Tires	22	05-06-2013 02:49 PM
Group Buy-BC Racing BR coilover Interest thread	g37xck	Brakes & Suspension	1	03-22-2013 04:40 PM
Brake Pad Backing Plate Importance	fuzzywuzzy	Brakes & Suspension	4	07-08-2012 08:00 PM
Press Release: Flex Tools now has a 4 3/8 backing plate for the Flex XC 3401	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	3	02-21-2011 07:38 AM
Front license plate carbon fiber backing group buy!	SpawnAeroJohn	Nissan 370Z General Discussions	14	07-06-2009 09:04 PM

06-09-2015, 03:31 PM	#121 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Just two people are interested in these Gears and backing plate?

06-09-2015, 04:49 PM	#122 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Just got an email from John at ati and said the damper should be out in about a month. So let's get on this band wagon and see how far it will fly.

06-09-2015, 07:01 PM	#126 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	I have previously PM'd phunk my interest. That said, I have a bead on an alternative: 1. External oil pump which I will use in conjunction with the CJM baffled sump and 2. A locally engineered dry-sump here in OZ - no firm price yet but some interesting murmurings (the manufacturer supplies dry-sump kits to the Aussie off-road and desert buggy-racers - about 25% of whom use VQ TT engines in their buggies with the dry-sump system).

06-09-2015, 07:02 PM	#127 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Roughly around 9 grand for a set up, not including installation cost, this is a good solution to increase revs and oil pump reliability.

06-10-2015, 12:40 AM	#134 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Wonder how many people have signed up