DIY: of complete FOG LAMP install

Dembflyr · 02-20-2012, 07:27 PM

Quote:

Originally Posted by Pat C.

Do you mind if I ask you a couple of question? First off, how does this unit mount? Don't show it as having the same backing as the normal style, or does it slip "into" the blank filler housing? . Also, did you wire in the on/off switch they sell too, or did you just tie into the existing rear wires. All i'm wanting to have is the blinking for backup along with the extra brake light. Will send thanks in advance. Wasn't sure if I should have sent you a PM or not.
Pat

If you want it to do multiple things you'll have to isolate the inputs using relays. And add a flasher unit for the blinking reverse light. Either that or you'll have to install a dual filament harness. Do you have experience wiring relays? I have a schematic in my album that you can use for a reference. If you need a schematic for your specific application PM me and Ill try to help.

As far as fitment the JDM lamp bolts right into place. Not sure about the Evo-r.

I know this thread is long but all the info you need is in here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM