|
First I gotta say thanks Modshack And then thanks to all the other input on this thread that helped me put together what I think is a rock solid install.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
12-06-2010, 06:56 PM
|
#11 (permalink) |
|
Base Member
Join Date: Oct 2009
Location: Denton, TX
Posts: 58
Drives: 2009/370z/TS/6MT
Rep Power: 16  |
First I gotta say thanks Modshack
 And then thanks to all the other input on this thread that helped me put together what I think is a rock solid install. Decided to go with the stainless steel lines even though the assembly is a little tougher it makes for a lot of piece of mind. Routed the lines over the sway bar and to the driver side. This was done using one 90 fitting and one 45 deg, which allowed the lines to easily clear the sway bar. I didn't like the idea of the lines being that low on the car (crappy roads here). Results, ECR track day and temps never got above 230.  This is opposed to my first track day being cut short with 280 deg temps.  Hopes this helps any others attempting this install.    
__________________
09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next  06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
