|
Those are the type of fittings that I would use not the fittings that are just push on with barbs and I believe that those are the fittings that people
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
03-08-2010, 04:40 PM
|
#10 (permalink) |
|
Base Member
Join Date: Dec 2009
Location: Port Saint Lucie Fl.
Age: 79
Posts: 31
Drives: 370Z Mag Black 6sp m
Rep Power: 17  |
Good post with the PDF
Those are the type of fittings that I would use not the fittings that are just push on with barbs and I believe that those are the fittings that people out there are having problems with not the type shown in the PDF you posted. Also at the end of the PDF it says to proof the fitting at twice the pressure and I am sure that the DIY people do not have the setup to do that. Just make the hose and slap it on. So here again I say have a shop put the fittings on, they have the equipment and will do a static pressure check of the lines for leaks. Just my opinion. Or you can purchase all the tools to do it your self correctly $$$$$$.
What did the oil filter commercial say " Pay me now or Pay me later" ?  Lets move on guys we are beating this one to death. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
