DIY: Oil Cooler (scratch built install, lottsa pics).....>.

cab83_750 · 03-14-2010, 05:55 PM

Modshack,

Thanks for the follow-up. This will be great for future DIYers. Is this your new setup (i.e., braided lines)?

Thanks.

Modshack · 03-14-2010, 06:03 PM

Quote:

Originally Posted by cab83_750

Modshack,

Thanks for the follow-up. This will be great for future DIYers. Is this your new setup (i.e., braided lines)?

Thanks.

No problem...I made some notes on page one as well..
I already had some stainless line and a few fittings, so decided to make this change to remove any possible question from the equation. Note though, that my original install was still perfect after 3500 miles, so the original design is not necessarily flawed....There are just install and usage variables that might impact the reliability..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 10:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 02:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM

03-14-2010, 05:55 PM	#1 (permalink)
cab83_750 Track Member Join Date: Apr 2009 Location: CA Posts: 887 Drives: 09 NISSAN 370Z Rep Power: 419	Modshack, Thanks for the follow-up. This will be great for future DIYers. Is this your new setup (i.e., braided lines)? Thanks.