|
In my case, both 90's threaded with the same amount of resistance, so it would have been impossible to get them both pointing the same way without doing this damage.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
04-05-2016, 01:28 PM
|
#35 (permalink) |
|
Base Member
 
Join Date: Mar 2014
Location: Sanford
Posts: 150
Drives: defensively
Rep Power: 12  |
In my case, both 90's threaded with the same amount of resistance, so it would have been impossible to get them both pointing the same way without doing this damage.
I called RPW and they were really nice. They gave me a break on the replacement oil cooler and also the 90d swivel fittings that I will now be using. I would recommend using the 90 swivel fittings (like the ones at the sandwich plate) so that you don't get yourself into this situation where the 2 90 fittings off of the oil cooler refuse to thread so that they both face the same way. Live and learn. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
