DIY: Oil Cooler (scratch built install, lottsa pics).....>.

LiquidZ · 05-18-2009, 07:14 AM

Question about your oil filter:

It looks like the PL14610 fits on our cars, but where do you go to check to see if it does in the first place?

Captain Tuttl · 05-18-2009, 07:43 AM

Can the stock oil pump handle the increased volume of the oil cooler, new piping, and slightly larger Pure One filter? Does the oil pressure decrease?

Modshack · 05-18-2009, 10:20 AM

Quote:

Originally Posted by Captain Tuttl

Can the stock oil pump handle the increased volume of the oil cooler, new piping, and slightly larger Pure One filter? Does the oil pressure decrease?

Increasing the oil volume has nothing to do with the pumps ability to pressurize the oiling system other than to keep temps down and therefore viscosity up. Cooler, higher viscosity oil will typically show a higher pressure were you to put a gauge on this.

wstar · 05-18-2009, 10:38 AM

Interesting about using a longer filter. This inspired me to xref the K&N filters. Looks like, their model HP-1010 is the equivalent. The specs are identical to the HP-1008 some of us are already using except that it's about 7/8" longer.

Modshack · 05-18-2009, 10:16 AM

Quote:

Originally Posted by LiquidZ

Question about your oil filter:

It looks like the PL14610 fits on our cars, but where do you go to check to see if it does in the first place?

It's also a 20mm thread. Linked above the picture is this thread: Don't Use Nissan OEM Oil Filters (Long Post - Lotsa Pics) - MyG37

Read it...Very interesting!

05-18-2009, 07:14 AM	#1 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 706	Question about your oil filter: It looks like the PL14610 fits on our cars, but where do you go to check to see if it does in the first place? __________________

05-18-2009, 10:38 AM	#4 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3596	Interesting about using a longer filter. This inspired me to xref the K&N filters. Looks like, their model HP-1010 is the equivalent. The specs are identical to the HP-1008 some of us are already using except that it's about 7/8" longer. __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 10:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 02:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM

05-18-2009, 07:43 AM	#2 (permalink)
Captain Tuttl Base Member Join Date: Apr 2009 Location: PA Posts: 36 Drives: 2019 370Z Nismo Rep Power: 18	Can the stock oil pump handle the increased volume of the oil cooler, new piping, and slightly larger Pure One filter? Does the oil pressure decrease?