SPL control arm setup Question.

Rangerz · 10-01-2014, 09:10 PM

Quote:

Originally Posted by SurfDog

I just bought SPL upper control arms To dial in a bit mor camber for the track.
SPL Front Upper Control Arms (370Z / G37)

A few questions:
1. has anybody put these on an otherwise stock setup? I'm wondering about where to set the "adjustment screws" to begin with a roughly stock geometry.

(I'm going to install at home then drive to the alignment shop. I'm hoping to be close to stock, or at least drivable for my trip to the align shop)

2. I'm hoping to learn to dial in two alignment setups: one close to stock, and one with 2-3 degrees camber for the track. when i go from stock alignment to more camber how will that affect my toe. (I believe I want a bit LESS toe for track days)

I have them on stock suspension. I measured the stock A arm once I got them out and adjusted the SPL to that. Then got the alignment right now I am running -2 deg up front and -1.7 in the rear. Make sure you read the instructions closly when adjusting the hiem joint adjusters. It is a double adjustment and you need to hold the hiem joint still as you run the adjusting screw in or out. If you skip this step you will get adjusters that are un even.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
traction control question !	Z11	Nissan 370Z General Discussions	44	01-10-2014 10:32 AM
question about AK370's winter setup	KWZ	Wheels & Tires	9	10-10-2012 12:42 PM
EVO-R Fog Light Setup Question	KeVoH	Exterior & Interior	10	02-24-2012 06:45 PM
FS: Defi setup (gauges and control unit) SOUTHERN VA	triggaZ	Parts for sale (Private Classifieds)	0	10-27-2010 05:46 AM
Traction Control Question	YamahaR6	Nissan 370Z General Discussions	8	07-13-2009 01:18 PM