Groove

ValidusVentus

I think you misunderstood, so I rewrote my post just slightly to make it more clear. In short I am proposing hacksawing a groove into my front XP10 brake pads perpendicular to their long axis (don't know how to express that clearly with smaller words) with the goal of getting a smoother and more consistent transfer layer of pad material on the rotor surface. Curious if anyone has done this modification to pads before and seen any difference. Even the less track oriented pads I use for the street (Endless MX72s) have this groove from the factory.

__________________
Mods: Dedicated caged track car, lots of things. ||| Valkyrie Autosport |||

SouthArk370Z

Radial is the shortest word I can come up with. YMMV

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

kenchan

TFIWYAM!

the f- is with your acronyms mang!

ValidusVentus

Yes I did a quick google of that, still not quite sure how it was applicable but I just went with it and tried not to be offended that he thought a link to the definition of radial was necessary

__________________
Mods: Dedicated caged track car, lots of things. ||| Valkyrie Autosport |||

SouthArk370Z

Ie, you may be able to find a better/shorter word.

Link wasn't necessarily for you. If someone needs it, they can click.

BTW, I've been BBSing since the mid-'80s when bits were expensive to transfer and store. Sorry if all the acronyms/abbreviations are confusing. Old habits are hard to break.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma