The Complete SPL Front Suspension

littlejuanito

Seems I'm gonna go the SPL route. The horrible stories I read about the SPC's, kinetic, and even Z1's very own FUCA's have leave me no choice but to spend more money once and not have to deal with issues later. Wished these SPL's were a little cheaper but oh well... at least they're worth it. Any other SPL parts you recommend?

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp

Rusty

All of the SPL catalog.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

cv129

Like a BOSS!

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

littlejuanito

I wished I had the money to blow on the whole catalog but nonetheless, are there any specific items you recommend I buy on front suspension, besides the upper arms? Tie rods? Impact bushings?

Thanks in advance Rusty

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp

Rusty

The main things to get would be the upper control arms, If you change sway bars, the end links. In the rear, camber arms. If your rear diff bushing is shot (leaking). The solid bushing kit or the White Line solid bushing kit.

The front tie rod kit may not allow aftermarket wheels to fit. Depending on width, and offset. Also it would be best to have a race shop set them up to get the bump steer correct. They are not something that you install and forget. You have to play around with them.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

littlejuanito

Thank you Rusty and yes I have Stillen sway bars installed so I'll get those end links as well. I don't have aftermarket wheels but may get some later so I'll skip on the tie rod.

__________________
Fast Intentions Non-Resonated Carbon Fiber CBE | Berk Non-Resonated HFC | Powertrix Coilovers | RJM Clutch Pedal | LatheWerks Shift Knob | Stillen Sway Bars, |SPL Parts | Enkei RS05RR | Fujimura Diffuser | Ecutek Tuned by Seb | 308whp