05-26-2013, 10:12 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Jun 2010
Location: SWMO
Posts: 4,454
Drives: 2019 CX5 GT Reserve
Rep Power: 7628
|
Quote:
Originally Posted by Chuck33079
One stop should never destroy a set of rotors. I've made plenty of panic stops and used my brakes hard with no issue. There's definitely something wrong with yours, and I'm at a loss as to what it is. You've replaced everything but the calipers, and you'd be able to feel it or hear it if a caliper was frozen. I doubt it's heat related, since you're saying it happened after a single stop. Have YOU gotten under the car and looked around? Are the rotors visibly damaged? Are the pads evenly worn? Is everything torqued down? Something's off in your front end. Lastly, this is a stupid question and I'm not trying to be insulting, but you're not holding the brake pedal down when you're stopped, right?
|
The rotors look ok to the eye. OEM pads looked glazed after 500 miles after being shaved, have not seen stoptech pads. I typically rock the car on inclines or let it creep on declines, even though I doubt I get it hot enough to matter, its habit. They have replaced so much **** they would have caught poor tq values by now or fixed it inadvertently. This is admittedly my first set of slotted rotors. Could it be that slight front end vibration and steering wheel shimmy/vibrarion under braking is normal with them?
|
|
|
Similar Threads
30Likes
Threaded Mode
