Swift springs review!!!!!

wheee! · 04-01-2013, 07:59 PM

Quote:

Originally Posted by bmarcinczyk14

so here's how my alignment turned out, what do you guys think? Close enough to get by without camber arms? The only thing that caught my attention was my front left camber is way off the front lefts. Something to be concerned about? That's the side that's making the creaking noises too, maybe the added negative camber there is something causing this since the insulators are all in their correct places.

( Click to show/hide )

You will still want rear camber arms.... I tried to go without but I decided the tire wear wasn't worth it and the cost of the camber arms was reasonable. Don't forget toe bolts too... can't do one without the other.

bmarcinczyk14 · 04-01-2013, 10:41 PM

Quote:

Originally Posted by wheee!

You will still want rear camber arms.... I tried to go without but I decided the tire wear wasn't worth it and the cost of the camber arms was reasonable. Don't forget toe bolts too... can't do one without the other.

Is there really any need for the toe bolts since my toe is all in spec?

Joepro · 04-02-2013, 08:42 AM

Quote:

Originally Posted by bmarcinczyk14

Is there really any need for the toe bolts since my toe is all in spec?

If its in its in, if the springs are fresh install they may sag as bit, and the measurements may change a tad, other than that I agree, unless you want to move to a toe angle you cannot at the moment, why go grinding away your sub frame?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM