Bell Raceworks Diff Brace Install

Joker_J · 09-15-2019, 10:33 PM

I just had the Motordyne Exhaust installed.
I'm guessing i'll have clearance issues as well ... :/

solidus · 09-16-2019, 03:48 PM

Quote:

Originally Posted by Joker_J

I just had the Motordyne Exhaust installed.
I'm guessing i'll have clearance issues as well ... :/

I was supposed to install mine awhile back and forgot the box. I've looked at it and it's looking like it may fit. I'm thinking that because the damned Motordyne vbands are capable of all kinds of jackassery in that area. It's right where the 45 degree bend out to the hubs is located. On my car the exhaust kinda hangs down there so thats why I think there may be some space. But with my luck I'll dryfit it and it'll look like a go then as soon as I remove the bolts it'll be impossible.

Spooler · 09-16-2019, 10:23 PM

Quote:

Originally Posted by solidus

I was supposed to install mine awhile back and forgot the box. I've looked at it and it's looking like it may fit. I'm thinking that because the damned Motordyne vbands are capable of all kinds of jackassery in that area. It's right where the 45 degree bend out to the hubs is located. On my car the exhaust kinda hangs down there so thats why I think there may be some space. But with my luck I'll dryfit it and it'll look like a go then as soon as I remove the bolts it'll be impossible.

Take a picture of your exhaust and send it to me via text. I can look at it and tell if it will fit or not.

solidus · 09-16-2019, 11:11 PM

Quote:

Originally Posted by Spooler

Take a picture of your exhaust and send it to me via text. I can look at it and tell if it will fit or not.

I'll shoot you one tomorrow.

BOLIO 671 · 02-19-2020, 11:37 AM

Old thread...but just posting a response that Z1 gave when asking about fitment issues with aftermarket exhaust...here’s what they wrote...

Quote:

Z1 Motorsports:
We have had no fitment issues as of yet with any of these exhausts. The only contact we would assume would be if the exhaust is not properly aligned before tightening leaving the exhaust being close or touching the brace however, as long as the exhaust is adjusted and installed properly you will have no fitment issues.

Thank you for your question. If you have any additional questions, please reply to this message. For fastest responses, please do not change the subject of the email.

-Z1 Motorsports
770-838-7777

PS...Rusty’s review still hasn’t been posted on their website

bunk · 02-19-2020, 12:32 PM

Quote:

Originally Posted by BOLIO 671

Old thread...but just posting a response that Z1 gave when asking about fitment issues with aftermarket exhaust...here’s what they wrote...

PS...Rusty’s review still hasn’t been posted on their website

I just ordered one last week. OEM diff cover and Invidia Gemini. I should be ok.

I wouldve gone with Performance Royalty's brace, but they cut out too much material for their logo.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2015+ Nismo Rear Chassis Brace Install	nismolucino	DIY Section (Do-It-Yourself)	9	02-22-2021 11:00 AM
Z1 Brake Master Cylinder Brace - Install Help	140BPM	Brakes & Suspension	10	04-22-2019 09:06 PM
Has anyone been able to install a Z1 master cylinder brace?	gshort24	Brakes & Suspension	4	08-11-2016 02:05 PM
Rear brace bar removal/install?	TriNismo	Exterior & Interior	8	08-17-2015 11:02 PM

09-15-2019, 10:33 PM	#1 (permalink)
Joker_J Track Member Join Date: Aug 2014 Location: The Ville, KY Posts: 580 Drives: 2014 NISSAN 370Z Rep Power: 14	I just had the Motordyne Exhaust installed. I'm guessing i'll have clearance issues as well ... :/