Bell Raceworks Diff Brace Install

Rusty · 01-30-2019, 08:58 PM

Something else I forgot to mention. On the bends of the brace. There is weld beads on the bends? The only thing that I can figure out. Is that when they bent the metal to shape. The metal cracked at the bends and they welded over the cracks to hide them.

Piss poor.

Rusty · 01-30-2019, 09:00 PM

I just got done writing a review on the brace on Z1's website.

redondoaveb · 01-30-2019, 09:13 PM

Quote:

Originally Posted by Rusty

I just got done writing a review on the brace on Z1's website.

I gotta read that.

Rusty · 01-30-2019, 09:20 PM

Quote:

Originally Posted by redondoaveb

I gotta read that.

I wrote it. I went back to read it and it's not there.

redondoaveb · 01-30-2019, 09:24 PM

Quote:

Originally Posted by Rusty

I wrote it. I went back to read it and it's not there.

Same here, it wasn't there

Rusty · 01-30-2019, 09:34 PM

Quote:

Originally Posted by redondoaveb

Same here, it wasn't there

Wonder if it gets reviewed first before they put it up.

redondoaveb · 01-30-2019, 09:52 PM

Quote:

Originally Posted by Rusty

Wonder if it gets reviewed first before they put it up.

Reviewed and then deleted.

nasm · 01-04-2022, 11:03 PM

Quote:

Originally Posted by Rusty

Something else I forgot to mention. On the bends of the brace. There is weld beads on the bends? The only thing that I can figure out. Is that when they bent the metal to shape. The metal cracked at the bends and they welded over the cracks to hide them.

Piss poor.

Thank you Rusty for the thread and heads up, in fact, I was planning to order mine and I found two options Bell Raceworks and Z1. Since i have stillen exhaust, which one you recommend, Z1 will work?

Appreciate your reply.

Regards,
NASM

Rusty · 01-05-2022, 05:37 PM

Quote:

Originally Posted by nasm

Thank you Rusty for the thread and heads up, in fact, I was planning to order mine and I found two options Bell Raceworks and Z1. Since i have stillen exhaust, which one you recommend, Z1 will work?

Appreciate your reply.

Regards,
NASM

I would get the Z1 brace before the Bell braces. Think Z1 finally got around to my criticism of the Bell brace.

nasm · 01-05-2022, 09:55 PM

Quote:

Originally Posted by Rusty

I would get the Z1 brace before the Bell braces. Think Z1 finally got around to my criticism of the Bell brace.

Will order the z1 now. Thanks Rusty

01-30-2019, 08:58 PM	#1 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,581 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Something else I forgot to mention. On the bends of the brace. There is weld beads on the bends? The only thing that I can figure out. Is that when they bent the metal to shape. The metal cracked at the bends and they welded over the cracks to hide them. Piss poor. Bswanny likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-30-2019, 09:00 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,581 Drives: 2011 Nismo GM 6M Rep Power: 2684440	I just got done writing a review on the brace on Z1's website. Hotrodz, Ghostvette, Spooler and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2015+ Nismo Rear Chassis Brace Install	nismolucino	DIY Section (Do-It-Yourself)	9	02-22-2021 11:00 AM
Z1 Brake Master Cylinder Brace - Install Help	140BPM	Brakes & Suspension	10	04-22-2019 09:06 PM
Has anyone been able to install a Z1 master cylinder brace?	gshort24	Brakes & Suspension	4	08-11-2016 02:05 PM
Rear brace bar removal/install?	TriNismo	Exterior & Interior	8	08-17-2015 11:02 PM