Feedback request:Daily Driver complete suspension rebuild plan.

El Zombo · 12-07-2017, 06:37 AM

Thank you all for the feedback.

I'm unsure how many bushings are on the rear knuckle side and if anyone makes poly replacements. Does this look like a complete list of replaceable bushings?

Front upper control arms inner
Front lower control arms inner
Front sway bar
Front sway bar endlinks
Front upper strut plate
Engine mounts
Tranny mounts
Differential lower and center
Rear subframe bushings
Rear upper control arms
Traction arms forward bushing
Camber arms forward bushing
Rear lower control arm inner
Rear sway bar
Rear sway bar endlink bushings

How many are on the rear knuckle? Do the traction, camber arms and lower control arm have rubber bushings on the knuckle side?

thanks!

-H

Rusty · 12-07-2017, 09:00 AM

There is 4 bushings on each rear knuckle. Traction arm, camber arm, mid link and lower shock. You have to remove the knuckle to replace the bushings. The mid link, traction and camber arms have no bushings on the side that mounts to the knuckle. They mount to the bushings in the knuckle.

Upgraded Rear Knuckle Bushings for 370Z and G37 | SPL Parts

There is no strut plate.

Chances are that you will have to drop the sub-frame to get to the rear upper arms. I haven't replaced those yet. That's an after Christmas project.

El Zombo · 12-07-2017, 02:08 PM

Quote:

Originally Posted by Rusty

There is 4 bushings on each rear knuckle. Traction arm, camber arm, mid link and lower shock. You have to remove the knuckle to replace the bushings. The mid link, traction and camber arms have no bushings on the side that mounts to the knuckle. They mount to the bushings in the knuckle.

Upgraded Rear Knuckle Bushings for 370Z and G37 | SPL Parts

There is no strut plate.

Chances are that you will have to drop the sub-frame to get to the rear upper arms. I haven't replaced those yet. That's an after Christmas project.

Rusty,

Thanks, man. I appreciate the replies and info. When I get all of this together I'll post the rebuild.

I thought for sure there was an upper strut plate with the studs that go through the strut tower? Am I getting the nomenclature wrong?

El Zombo · 12-07-2017, 02:31 PM

Did I get this right?

Rusty · 12-07-2017, 08:35 PM

Quote:

Originally Posted by El Zombo

Rusty,

Thanks, man. I appreciate the replies and info. When I get all of this together I'll post the rebuild.

I thought for sure there was an upper strut plate with the studs that go through the strut tower? Am I getting the nomenclature wrong?

What you are seeing, is the upper mounting bracket for the coilover.

12-07-2017, 09:00 AM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,573 Drives: 2011 Nismo GM 6M Rep Power: 2684440	There is 4 bushings on each rear knuckle. Traction arm, camber arm, mid link and lower shock. You have to remove the knuckle to replace the bushings. The mid link, traction and camber arms have no bushings on the side that mounts to the knuckle. They mount to the bushings in the knuckle. Upgraded Rear Knuckle Bushings for 370Z and G37 \| SPL Parts There is no strut plate. Chances are that you will have to drop the sub-frame to get to the rear upper arms. I haven't replaced those yet. That's an after Christmas project. El Zombo likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
75k Miles - Time for Suspension Rebuild - Help!	ecoplunge	Brakes & Suspension	13	12-14-2017 08:15 PM
Help please, I blew my motor and need to plan the rebuild	SurfDog	Engine & Drivetrain	88	06-14-2017 08:22 PM
DIY - Complete Brake Rebuild F&R	B&W_Evader	DIY Section (Do-It-Yourself)	24	02-10-2017 03:28 PM
Daily Driver	CodeOfSilence	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	01-17-2011 10:14 PM

12-07-2017, 06:37 AM	#1 (permalink)
El Zombo Base Member Join Date: Nov 2017 Location: VA Posts: 21 Drives: 2014 370 White MT Rep Power: 9	Thank you all for the feedback. I'm unsure how many bushings are on the rear knuckle side and if anyone makes poly replacements. Does this look like a complete list of replaceable bushings? Front upper control arms inner Front lower control arms inner Front sway bar Front sway bar endlinks Front upper strut plate Engine mounts Tranny mounts Differential lower and center Rear subframe bushings Rear upper control arms Traction arms forward bushing Camber arms forward bushing Rear lower control arm inner Rear sway bar Rear sway bar endlink bushings How many are on the rear knuckle? Do the traction, camber arms and lower control arm have rubber bushings on the knuckle side? thanks! -H