Z1 front adjustable camber arms

zefaulter · 05-09-2016, 02:05 PM

I was so close to buying this. Glad I'm not one of the test subjects.

Sent from my SM-N910W8 using Tapatalk

RumbleFish · 05-09-2016, 03:35 PM

Hmmm, i see you guys reporting similar issues even w/ the new bolt & loctite.

To this point, mine seem to be ok still. No clunking, no squeaking, nada.

I even took her for a 'spirited' run in the twisties.

Man, this is not good.

RumbleFish · 05-09-2016, 03:37 PM

Quote:

Originally Posted by wideglideleon

Got to check it last evening and yes the bolt had backed out AGAIN.
I replaced the bolt and used copious amounts of the thread locker Z1 sent me.

Arrggh I will be contacting Z1 again to see what they say about this on going issue.

This is not something I want to have to worry about and redo over and over again.

Really anxious to hear what they had to say.

14BlackCherry · 05-09-2016, 03:52 PM

Quote:

Originally Posted by wideglideleon

Got to check it last evening and yes the bolt had backed out AGAIN.
I replaced the bolt and used copious amounts of the thread locker Z1 sent me.

Arrggh I will be contacting Z1 again to see what they say about this on going issue.

This is not something I want to have to worry about and redo over and over again.

This sucks bro sorry to hear I don't daily my car, but I hit a pretty big bump the other night and the arms are still tight. I have an alignment on Wed so I'll have them double check to see if that bolt has loosened up, but right now it's still tight.

Slartibartfas · 05-09-2016, 05:26 PM

If you're married to the Z1 arms, drill a hole through the thread and use a castle nut with cotter key. You know, old school...

wideglideleon · 05-09-2016, 05:33 PM

I had the shop use the loctite that Z1 suggested and they reused the bolt that came loose when they did the repair. I am thinking maybe the bolt was dirty from the previous thread locker. So when the bolt came loose this time I used the new bolt Z1 sent me and made sure the threads it screws into were super clean and used copious amount of the loctite. Fingers and toes crossed this fixes it for good.

Spencer has been very forthright and said if they come loose again he is more then willing to give me a full refund no problem.
Unhappy they seem to have problems, but I am satisfied on how Z1 is handling the situation.

RumbleFish · 05-09-2016, 05:42 PM

I've got a track day this Sunday. That should be a good test

Wonka2581 · 05-09-2016, 07:24 PM

I'm not having a problem with my bolts coming lose... My issue is where the bushings meet the frame.. There's still that God awefull noise of them rubbing....

Rusty · 05-09-2016, 08:27 PM

Quote:

Originally Posted by Slartibartfas

If you're married to the Z1 arms, drill a hole through the thread and use a castle nut with cotter key. You know, old school...

You could safety wire it too.

BeemaaZ · 05-09-2016, 08:47 PM

I almost bought this.

Thanks for the review

weebs25 · 05-14-2016, 01:25 PM

Same here! I have been following this for a while and just about ordered them and saw the issue that started happening. To bad I was hoping for a solid product..

NorthStyle · 05-14-2016, 03:13 PM

I was thinking about them for a while as well, ended up going with SPL arms instead.

RumbleFish · 05-16-2016, 07:28 PM

Did 4 sessions @ Streets of Willow Springs and no problems /w the Z1 fuca's

my best lap was 136.5...ok for my 1st time there.

lhinojos · 05-17-2016, 01:10 AM

Hey there rumblefish!! I'm the one that snagged the Blue group 1st place by 4/100's of a second haha

Good times man! You coming to autoclub next month?

RumbleFish · 05-17-2016, 12:33 PM

Quote:

Originally Posted by lhinojos

Hey there rumblefish!! I'm the one that snagged the Blue group 1st place by 4/100's of a second haha

Good times man! You coming to autoclub next month?

I hate you

Yeah man, that was a blast. Don't know if I'll make Fontana next month but, I'll be back out at Willow next opportunity.

Congrats on your lap time. I bet next time we'll both be down close to 130, 131

See you out there. Nice meeting you.

05-09-2016, 02:05 PM	#91 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	I was so close to buying this. Glad I'm not one of the test subjects. Sent from my SM-N910W8 using Tapatalk wideglideleon likes this.

05-09-2016, 03:35 PM	#92 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8239	Hmmm, i see you guys reporting similar issues even w/ the new bolt & loctite. To this point, mine seem to be ok still. No clunking, no squeaking, nada. I even took her for a 'spirited' run in the twisties. Man, this is not good. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

05-09-2016, 05:26 PM	#95 (permalink)
Slartibartfas Track Member Join Date: Apr 2016 Location: Houston Posts: 551 Drives: 2011 G37S sedan Rep Power: 10	If you're married to the Z1 arms, drill a hole through the thread and use a castle nut with cotter key. You know, old school... __________________ 2011 Journey Sport sedan 7AT \| SPL front, SPC rear camber arms \| ARK Grip cat-back \|

05-09-2016, 05:42 PM	#97 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8239	I've got a track day this Sunday. That should be a good test Wonka2581 and Silly Rabbit like this. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

05-09-2016, 07:24 PM	#98 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	I'm not having a problem with my bolts coming lose... My issue is where the bushings meet the frame.. There's still that God awefull noise of them rubbing.... __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

05-09-2016, 05:33 PM	#96 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I had the shop use the loctite that Z1 suggested and they reused the bolt that came loose when they did the repair. I am thinking maybe the bolt was dirty from the previous thread locker. So when the bolt came loose this time I used the new bolt Z1 sent me and made sure the threads it screws into were super clean and used copious amount of the loctite. Fingers and toes crossed this fixes it for good. Spencer has been very forthright and said if they come loose again he is more then willing to give me a full refund no problem. Unhappy they seem to have problems, but I am satisfied on how Z1 is handling the situation.

05-09-2016, 08:47 PM	#100 (permalink)
BeemaaZ A True Z Fanatic Join Date: Sep 2011 Location: Irvine, CA Posts: 2,594 Drives: 40thAE#472 Rep Power: 507	I almost bought this. Thanks for the review __________________ SoCal 40th Meet Old & New Mods Steering Lock RECALL**** Own 40th 370Z? Get the build # and the Manuf. date here

05-14-2016, 01:25 PM	#101 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 217 Drives: 09 black mt Rep Power: 3367	Same here! I have been following this for a while and just about ordered them and saw the issue that started happening. To bad I was hoping for a solid product..

05-14-2016, 03:13 PM	#102 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	I was thinking about them for a while as well, ended up going with SPL arms instead. Rusty likes this.

05-16-2016, 07:28 PM	#103 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8239	Did 4 sessions @ Streets of Willow Springs and no problems /w the Z1 fuca's my best lap was 136.5...ok for my 1st time there. lhinojos and DatsunFTW like this. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

05-17-2016, 01:10 AM	#104 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	Hey there rumblefish!! I'm the one that snagged the Blue group 1st place by 4/100's of a second haha Good times man! You coming to autoclub next month? RumbleFish likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Adjustable front camber arms	Big worm	Parts for sale (Private Classifieds)	2	05-08-2014 03:06 PM
[WTB] Adjustable Front Camber Arms	Wiggins3377	Parts for sale (Private Classifieds)	17	03-15-2014 01:56 PM
AMS Front Camber Adjustable Arms	SPOHN	Brakes & Suspension	65	02-17-2013 12:14 AM
WTB: FRONT and REAR adjustable Camber Arms.	TMAN1985	Wanted	7	10-29-2011 05:10 PM
SLP adjustable FRONT camber arms FYI	gozfast	Brakes & Suspension	33	09-28-2011 07:01 PM