Suspension/brake problem - slight shudder and left pull

Rangerz

I had a similar problem where the driver side wheel would shudder badly under hard breaking at the track. When i did the SPL bearing swap i had to pull my rotors off and the inside of both rotors had burn in deposits in the shape of the pad. I used some break clean and steel wool to clean the deposits off and the are back to being smooth a silk. Apparently after a session i sat with the breaks applied No No that i know is not ideal. I would check that first then maybe get them turned or replaced.

__________________
Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY