What is your drag wheel set up?

andre12031948

You claim to have a very heavily modified car, yet you don't understand the simple basics.???

"smaller size tires" help my traction??? Same as narrower tires help traction. As you reduce the amount of rubber on the ground, you reduce the traction. Doesn't matter how you reduce it.

ALL heavily modified cars like yours use stock gears. I won't tell you why because you SHOULD know that! Going from 3:70 to 3:90 gears just doesn't make much sense anyway. High h.p. cars can only run the 1/4 with slicks. ALL slicks & most if not all drag radials are between 15" & some to 17". Most slick cars run 15"-16" wheels as long as they clear the breaks & of course the tires most likely be smaller in circumference than stock. That would bring your "ratio" to around 3:90 anyway. I'm sure you don't understand that either .

I DON'T tell you this as a put down, I tell you this because I find it hard to believe your posts & I'm not going to continue with them.

Oh, don't all Z's come with sway bars? Now I'm not sure about the rear? Anyway sway bars help when cornering not drag racing.