370z MEATY TIRE THREAD

Hotrodz · 06-24-2017, 10:37 PM

Quote:

Originally Posted by ChaseZ

Hence the problem. I need something equivalent to an RE11 or PSS for daily and can't get anything remotely close in 18's anymore.

Yup I daily on my oem 19s so re-11's have been my fo to I may do ps4's next because I can get them on the cheap!

Sent from my SM-N910P using Tapatalk

ChaseZ · 07-06-2017, 09:29 PM

Got the Advan F7's, they definitely aren't meaty. Will have to take care of that promptly. In the meantime going to refinish them. Originally they were just bare with clearcoar, might either go back to that or powdercoat a nice gun metal.

jsavvy · 08-11-2017, 01:42 AM

Feel like I read through every page, trying to nail this down.

Heres what I am thinking -

Front - 19x9.5 +22 w/ 285/35/19
Rear - 19x10.5 +12 w/ 325/30/19 (Can i squeeze 345)?
(No VDC issues here right?)

Lowered on Swifts...

Will I rub with stock camber components?

I dont think so because the diameters are relatively close to what i have right now and i dont rub one bit while running-

Front 18x9.5 +12 w/ 245/45/18
Rear 18x11 +20 (-25mm Spacer, -5 effective) w/ 275/40/18

jchammond · 08-11-2017, 02:03 AM

Quote:

Originally Posted by jsavvy

Feel like I read through every page, trying to nail this down.

Heres what I am thinking -

Front - 19x9.5 +22 w/ 285/35/19
Rear - 19x10.5 +12 w/ 325/30/19 (Can i squeeze 345)?
(No VDC issues here right?)

Lowered on Swifts...

Will I rub with stock camber components?

I dont think so because the diameters are relatively close to what i have right now and i dont rub one bit while running-

Front 18x9.5 +12 w/ 245/45/18
Rear 18x11 +20 (-25mm Spacer, -5 effective) w/ 275/40/18

Which tire mfg are you looking at?
As the fitment of a 285/35 will fit a 9.5" wheel no problem,
The 345's usually call for a 12" wheel....My Nitto Invo's are probably the narrowest 345's mounted on a 19x12, measuring 13.3" at widest point/ while Michelins are 13.8".
The Invo's will be your best shot at a 345,as by the way it fits-appears it would fit an 11" wheel...they may be pinched on a 10.5", but I've seen 345/30/18 drag radials on a 10.5 wheel.

Rusty · 08-11-2017, 04:56 AM

I running 285/35-19 P4S on 19x9.5, +25 front. Stock height. There is a small lump inside the fender, towards the bumper. Think it is for bolt clearance. That's the only place that I rub at. I do trackdays. So that maybe why I rub in that spot. The extra cornering forces.
In the rear. I'm running 345/30-19 PPS on 19x12, +28. No rubbing, but I don't think I have enough clearance to run a true coil-over in the rear. It's tight at the top of tire and shock. If true coil-overs are in your plans. Go with the 325's.

ghotnit · 09-13-2017, 07:31 PM

Joined the meaty club.

Rusty · 09-13-2017, 07:56 PM

Quote:

Originally Posted by ghotnit

Joined the meaty club.

What size rims?

ZAtlanta_OG · 09-13-2017, 08:51 PM

Alcfrasier1 · 09-13-2017, 11:02 PM

Could I run 305/35/20 with 1 inch spacers in the rear?

Rusty · 09-14-2017, 04:14 AM

Quote:

Originally Posted by Alcfrasier1

Could I run 305/35/20 with 1 inch spacers in the rear?

What size rims?

Alcfrasier1 · 09-14-2017, 09:35 AM

Quote:

Originally Posted by Rusty

What size rims?

20" reverse mount. About 10 in width. Running 275 on the rear right now

NorthStyle · 09-14-2017, 01:26 PM

Quote:

Originally Posted by Alcfrasier1

20" reverse mount. About 10 in width. Running 275 on the rear right now

Reverse mount? What does that mean, exactly? Also, what is the offset of these wheels?

Rusty · 09-14-2017, 07:18 PM

Quote:

Originally Posted by Alcfrasier1

20" reverse mount. About 10 in width. Running 275 on the rear right now

Ok, now we know you have 20" diameter rims. How wide are they? And what is the offset? Without those numbers (no guessing). You won't get an answer. You guess, you may get anything. It's GIGO. Garbage in, garbage out. To find the numbers. They are stamped on the backside of the rim disc on most rims.

ghotnit · 09-16-2017, 11:53 AM

Quote:

Originally Posted by Rusty

What size rims?

Standard Nismo wheels

MaysEffect · 09-16-2017, 01:20 PM

Quote:

Originally Posted by NorthStyle

Reverse mount? What does that mean, exactly? Also, what is the offset of these wheels?

https://www.tirerack.com/tires/tiret...jsp?techid=314

sponsored by tirerack

07-06-2017, 09:29 PM	#1112 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94682	Got the Advan F7's, they definitely aren't meaty. Will have to take care of that promptly. In the meantime going to refinish them. Originally they were just bare with clearcoar, might either go back to that or powdercoat a nice gun metal. carlitos_370z likes this.

08-11-2017, 04:56 AM	#1115 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,861 Drives: 2011 Nismo GM 6M Rep Power: 2684436	I running 285/35-19 P4S on 19x9.5, +25 front. Stock height. There is a small lump inside the fender, towards the bumper. Think it is for bolt clearance. That's the only place that I rub at. I do trackdays. So that maybe why I rub in that spot. The extra cornering forces. In the rear. I'm running 345/30-19 PPS on 19x12, +28. No rubbing, but I don't think I have enough clearance to run a true coil-over in the rear. It's tight at the top of tire and shock. If true coil-overs are in your plans. Go with the 325's. Hotrodz and jchammond like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-13-2017, 08:51 PM	#1118 (permalink)
ZAtlanta_OG Enthusiast Member Join Date: May 2015 Location: Florida Posts: 315 Drives: 370z Rep Power: 321	carlitos_370z, Moon, Memphis370Z and 2 others like this. __________________ MY PHOTO BLOG instagram 2012 Nismo #268

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
yet another "what size tire" thread	Astrosfan	Wheels & Tires	20	10-13-2011 07:29 PM
The Winter Wheel/Tire Thread	osbornsm	Wheels & Tires	1	10-03-2011 09:56 AM
Official 40th Anniversary 370Z (Black Edition 370Z in Europe) Picture Thread	AK370Z	40th Anniversary 370Z	10	05-19-2010 11:11 AM
If your looking for a real meaty sports car that isn't a Porshe this is it	Asheth	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	08-24-2009 09:17 AM

08-11-2017, 01:42 AM	#1113 (permalink)
jsavvy Base Member Join Date: Nov 2016 Location: SoCal Posts: 49 Drives: 14 370z MB 6MT Rep Power: 8	Feel like I read through every page, trying to nail this down. Heres what I am thinking - Front - 19x9.5 +22 w/ 285/35/19 Rear - 19x10.5 +12 w/ 325/30/19 (Can i squeeze 345)? (No VDC issues here right?) Lowered on Swifts... Will I rub with stock camber components? I dont think so because the diameters are relatively close to what i have right now and i dont rub one bit while running- Front 18x9.5 +12 w/ 245/45/18 Rear 18x11 +20 (-25mm Spacer, -5 effective) w/ 275/40/18

09-13-2017, 11:02 PM	#1119 (permalink)
Alcfrasier1 Base Member Join Date: Aug 2017 Location: Ohio Posts: 3 Drives: 2010 Nissan 370Z Rep Power: 7	Could I run 305/35/20 with 1 inch spacers in the rear?