Official VOLK 370Z Thread: POST UM UP!

[Hotrodz]

Yep, I run Nt03's 10.5 +30 (might be 33) square with 15mm spacers in the rear with no problem. It is awesome to be able to rotate the tires and rims not have to remove the tires from the rims!

[1cleanZ]

Originally Posted by OptionZero

then you may need to go to an 18 wheel to get the better tire selection. Fortunately they're pretty cheap - stuff like the Enkei NT03 or RPF1 come in 18x10.5 +18 i believe and can fit a 285 tire but you'll have to check the barrel clearance for the brakes

lots of folks track on those wheels, so i believe in the quality

Yep, well aware, but neither will fit over AP Radi-Cal BBK's. TE37 is the only known 18" wheel that will clear, but I'm set on 19's vs 18's anyways. After testing this weekend I'm going 275/35 front with 285/35 rear for classing for Gridlife. For street I'll most likely do 275/35 front and a 305/30 rear

[1cleanZ]

Originally Posted by Hotrodz

Yep, I run Nt03's 10.5 +30 (might be 33) square with 15mm spacers in the rear with no problem. It is awesome to be able to rotate the tires and rims not have to remove the tires from the rims!

This was my ultimate goal at first was to run 10" +29 TE37...but I found out they don't clear my calipers w/ the AP Radi-Cal's, so then I went to 10.5_22 with the intentions to run square 285/30's with .... and then seeing they didn't make them, the 285/35 testing started which I just don't think I can pull off in the front. WELL, I could...if I raised the car a little... which we all know isn't an option in my book

[Hotrodz]

Originally Posted by 1cleanZ

This was my ultimate goal at first was to run 10" +29 TE37...but I found out they don't clear my calipers w/ the AP Radi-Cal's, so then I went to 10.5_22 with the intentions to run square 285/30's with .... and then seeing they didn't make them, the 285/35 testing started which I just don't think I can pull off in the front. WELL, I could...if I raised the car a little... which we all know isn't an option in my book

Right on...I forgot you were running a big brake kit. LMAO and thumbs up for keeping her low for mo go! I raised mine up and I'm now 1" below stock. This allows me to run a taller tire if I want and I can open the driver's door over the fender on my trailer lol! I may still drop it another .5 to an inch because it does look way better and it's functional on the track.

[1cleanZ]

Originally Posted by OptionZero

then you may need to go to an 18 wheel to get the better tire selection. Fortunately they're pretty cheap - stuff like the Enkei NT03 or RPF1 come in 18x10.5 +18 i believe and can fit a 285 tire but you'll have to check the barrel clearance for the brakes

lots of folks track on those wheels, so i believe in the quality

Jonathan! Just saw your posts in the FI thread. Please, email me directly if you ever have any questions, Lance@nextlevelperf.com

I would never have known you had a question if I hadn't brouses their thread randomly (I avoid due to conflict of interest, and Kevin/FI can handle most questions in there).

Your order # is PO#586. We are not provided with an "exhaust #" from them, its simply updated on their board when they post it up randomly.

[1cleanZ]

Originally Posted by Hotrodz

Right on...I forgot you were running a big brake kit. LMAO and thumbs up for keeping her low for mo go! I raised mine up and I'm now 1" below stock. This allows me to run a taller tire if I want and I can open the driver's door over the fender on my trailer lol! I may still drop it another .5 to an inch because it does look way better and it's functional on the track.

Your car has come a looooooooong ways in the last few years brother!

[Hotrodz]

Originally Posted by 1cleanZ

Your car has come a looooooooong ways in the last few years brother!

Yes it has and I am in conversation with Seb about even more mods...tracking has me chasing another rabbit down the proverbial rabbit hole.

[TerribleONE]

Originally Posted by 1cleanZ

Your car has come a looooooooong ways in the last few years brother!

Yes it has! Looks even better in person!

[ekferio]

It might be a dumb question but will I able to fit my new volks in their boxes inside the Z? I need to take them to a shop to swap tires.

[VQZ34]

Originally Posted by ekferio

It might be a dumb question but will I able to fit my new volks in their boxes inside the Z? I need to take them to a shop to swap tires.

No, tried that with my te37 it wouldn't fit had to take two cars to the shop

Sent from my SM-G930T using Tapatalk

[ekferio]

Originally Posted by VQZ34

No, tried that with my te37 it wouldn't fit had to take two cars to the shop

Sent from my SM-G930T using Tapatalk

damn really? Even without boxes?

[VQZ34]

Originally Posted by ekferio

damn really? Even without boxes?

Haven't tried without boxes lols

Sent from my SM-G930T using Tapatalk

[1cleanZ]

They'll fit without boxes. I fit 4 wheels and tires in my Z with the spare removed on the way to the track. 2 in the front seat and 2 in the hatch

[Spooler]

Originally Posted by Hotrodz

Yes it has and I am in conversation with Seb about even more mods...tracking has me chasing another rabbit down the proverbial rabbit hole.

What the heck do you need to fix? I thought the Driver was coming along perty good, No?

[Hotrodz]

Lol, the driver mod is coming along pretty nicely. Progressively getting better and faster. The car does not like the heat...I need a bigger oil cooler and someway to keep the coolant temps down. Plus 90* weather and the twins don't go together real well lol!

Sent from my SM-N910P using Tapatalk